TIMKEN Pillow Block Bearing: 1 1/4 in Bore, Cast Iron, Set Screws, 1 13/16 in Shaft Ht
The TIMKEN SAK 1-1/4S is a low-base pillow block ball bearing with a 1 1/4 in bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a 1 13/16 in shaft height and a 1/2 in…
SKU 3G-OTH-105908
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN SAK 1-1/4S is a low-base pillow block ball bearing with a 1 1/4 in bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a 1 13/16 in shaft height and a 1/2 in mounting bolt size, designed for industrial shaft support applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN SAK 1-1/4S pillow block bearing used for?
The TIMKEN SAK 1-1/4S is a low-base pillow block ball bearing used to support rotating shafts in industrial machinery. It is commonly applied in conveyors, fans, and material handling equipment where a compact, cast-iron housing with set screw locking is required for reliable shaft support.
What are the specifications of the TIMKEN SAK 1-1/4S?
The TIMKEN SAK 1-1/4S has a 1 1/4 in bore, cast iron housing, set screw locking, and a 1 13/16 in shaft height. It uses inch-system measurements with a 1/2 in mounting bolt size. This low-base pillow block bearing is designed for industrial shaft support applications.
Where to buy the TIMKEN SAK 1-1/4S worldwide?
You can source the TIMKEN SAK 1-1/4S worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this TIMKEN pillow block bearing.
How to install the TIMKEN SAK 1-1/4S pillow block bearing?
To install the TIMKEN SAK 1-1/4S, first ensure the shaft is clean and free of burrs. Slide the bearing onto the shaft, align the mounting holes with the base, and tighten the 1/2 in bolts evenly. Secure the set screws against the shaft using a hex key, then verify free rotation before operation.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN low-base pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
