TIMKEN 2 Bolt Flange Bearing: Radial Ball, 1 1/4 in Bore, Cast Iron, Eccentric Collar
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 1/4 in cylindrical bore, cast iron housing, and eccentric collar. It uses NLGI #2 equivalent lubricant and has a 1/2 in…
SKU 3G-OTH-119141
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 1/4 in cylindrical bore, cast iron housing, and eccentric collar. It uses NLGI #2 equivalent lubricant and has a 1/2 in mounting bolt size. This inch-system radial ball bearing (MPN RCJT 1-1/4) measures 6 1/8 in length.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 2 Bolt Flange Bearing used for?
The TIMKEN 2 Bolt Flange Bearing is used in general purpose industrial applications requiring radial load support and shaft alignment. It is commonly found on conveyors, fans, and material handling equipment where a compact, two-bolt mounting flange with an eccentric collar locking mechanism is needed.
What are the specifications of the TIMKEN RCJT 1-1/4 flange bearing?
The TIMKEN RCJT 1-1/4 is a 2 bolt flange bearing with a 1 1/4 in cylindrical bore, cast iron housing, and eccentric collar. It uses NLGI #2 equivalent lubricant, has a 1/2 in mounting bolt size, and measures 6 1/8 in length. The system of measurement is inch.
Where to buy TIMKEN RCJT 1-1/4 flange bearings worldwide?
You can source TIMKEN RCJT 1-1/4 flange bearings worldwide through 3G Electric. As a global industrial equipment distributor, 3G Electric handles full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this TIMKEN part.
How to install a TIMKEN 2 bolt flange bearing with eccentric collar?
To install, slide the bearing onto the shaft, align the flange bolt holes, and tighten the mounting bolts. Rotate the eccentric collar in the direction of shaft rotation until snug, then tighten the setscrew against the shaft. Always follow TIMKEN's recommended torque values and shaft tolerances for proper fit.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
