TIMKEN Pillow Block Bearing: 1 1/8 in Bore, Cast Iron, Eccentric Collar
The TIMKEN VAK 1-1/8 is an inch-system low-base pillow block ball bearing with a 1 1/8 in bore, designed for industrial equipment. It features a cast iron housing, an eccentric collar, a 1 9/16 in shaft height, and a…
SKU 3G-OTH-104581
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN VAK 1-1/8 is an inch-system low-base pillow block ball bearing with a 1 1/8 in bore, designed for industrial equipment. It features a cast iron housing, an eccentric collar, a 1 9/16 in shaft height, and a 1/2 in mounting bolt size.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN VAK 1-1/8 pillow block bearing used for?
The TIMKEN VAK 1-1/8 is a low-base pillow block ball bearing used in industrial equipment to support rotating shafts. Its cast iron housing and eccentric collar provide secure shaft mounting in conveyors, fans, and material handling systems where inch-dimension components are required.
What are the specifications of the TIMKEN VAK 1-1/8?
The TIMKEN VAK 1-1/8 has a 1 1/8 in bore, a 1 9/16 in shaft height, and a 1/2 in mounting bolt size. It uses an inch system of measurement, features a cast iron housing with an eccentric collar, and is a low-base pillow block ball bearing.
Where to buy the TIMKEN VAK 1-1/8 worldwide?
You can source the TIMKEN VAK 1-1/8 pillow block bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring you receive genuine TIMKEN components for your operations.
How to install the TIMKEN VAK 1-1/8 pillow block bearing?
To install the TIMKEN VAK 1-1/8, first align the bearing base on a flat surface and secure it using 1/2 in bolts. Tighten the eccentric collar onto the shaft in the direction of rotation, then lock it in place. Ensure the shaft rotates freely before finalizing the mounting.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN low-base pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
