TIMKEN Pillow Block Bearing: 1 3/16 in Bore, Cast Iron, Set Screws, 1 9/16 in Shaft Ht
The TIMKEN YAK 1-3/16 SGT is an inch-system low-base pillow block ball bearing with a 1 3/16-inch bore, cast iron housing, and set screw locking. It features a 1 9/16-inch shaft height and accommodates a 1/2-inch…
SKU 3G-OTH-104860
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN YAK 1-3/16 SGT is an inch-system low-base pillow block ball bearing with a 1 3/16-inch bore, cast iron housing, and set screw locking. It features a 1 9/16-inch shaft height and accommodates a 1/2-inch mounting bolt size.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN YAK 1-3/16 SGT pillow block bearing used for?
The TIMKEN YAK 1-3/16 SGT is a low-base pillow block ball bearing used in industrial power transmission systems to support rotating shafts. It is commonly applied in conveyors, fans, and material handling equipment where a compact, inch-system bearing with set screw locking is required.
What are the specifications of the TIMKEN YAK 1-3/16 SGT?
The TIMKEN YAK 1-3/16 SGT has a 1 3/16-inch bore, cast iron housing, set screw locking, and a 1 9/16-inch shaft height. It uses a 1/2-inch mounting bolt size and is an inch-system low-base pillow block ball bearing. The manufacturer part number is YAK 1-3/16 SGT.
Where to buy the TIMKEN YAK 1-3/16 SGT worldwide?
3G Electric supplies the TIMKEN YAK 1-3/16 SGT worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this inch-system pillow block bearing.
How to install the TIMKEN YAK 1-3/16 SGT pillow block bearing?
To install the TIMKEN YAK 1-3/16 SGT, first ensure the shaft is clean and the bore matches 1 3/16 inches. Align the bearing with the mounting holes and tighten the 1/2-inch bolts. Secure the set screws onto the shaft using a hex key. Follow standard bearing installation practices for proper alignment and lubrication.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN low-base pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
