TIMKEN 4 Bolt Flange Bearing: Radial Ball, 1 3/8 in Bore, Cast Iron, Set Screws
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 3/8 in cylindrical bore, cast iron housing, and set screw locking. It features a 4 5/8 in square flange length, uses a 7/16 in…
SKU 3G-OTH-109476
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 3/8 in cylindrical bore, cast iron housing, and set screw locking. It features a 4 5/8 in square flange length, uses a 7/16 in mounting bolt, and is lubricated with NLGI #2 equivalent grease. This inch-system bearing is identified by manufacturer part number YCJ1-3/8 SGT.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 4 Bolt Flange Bearing used for?
The TIMKEN 4 Bolt Flange Bearing is used in industrial power transmission systems to support rotating shafts in conveyor lines, material handling equipment, and agricultural machinery. Its cast iron housing and set screw locking provide secure mounting in moderate-load, general-purpose applications where radial loads and misalignment are present.
What are the specifications of the TIMKEN YCJ1-3/8 SGT flange bearing?
The TIMKEN YCJ1-3/8 SGT is a 4 bolt flange bearing with a 1 3/8 in cylindrical bore, cast iron housing, and set screw locking. It has a 4 5/8 in square flange length, uses a 7/16 in mounting bolt, and is lubricated with NLGI #2 equivalent grease. The system of measurement is inch.
Where to buy TIMKEN flange bearings worldwide?
You can source TIMKEN flange bearings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the TIMKEN YCJ1-3/8 SGT or other inch-system flange bearings.
How to install a TIMKEN 4 bolt flange bearing?
To install a TIMKEN 4 bolt flange bearing, first ensure the shaft is clean and free of burrs. Slide the bearing onto the shaft, align the flange bolt holes with the mounting surface, and tighten the 7/16 in bolts evenly. Tighten the set screws against the shaft using a hex key, then apply NLGI #2 grease per the manufacturer's lubrication schedule.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
