TIMKEN Flange Mount Bearing: Radial Ball, 1 1/8 in Bore, Cast Iron, Set Screws
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 1/8 in cylindrical bore and a cast iron, not-split housing. It features set screws, a 4 1/4 in length, and a square configuration…
SKU 3G-OTH-107299
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 1/8 in cylindrical bore and a cast iron, not-split housing. It features set screws, a 4 1/4 in length, and a square configuration, lubricated with NLGI 2 Lithium Complex Grease. The mounting bolt size is 3/8 in, and the system of measurement is inch.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN Flange Mount Bearing used for?
The TIMKEN Flange Mount Bearing is used in general purpose industrial applications to support rotating shafts and reduce friction. It is commonly found in conveyors, fans, and material handling equipment where a compact, square flange mount with set screws provides secure shaft retention.
What are the specifications of the TIMKEN Flange Mount Bearing YCJ 1-1/8 SGT?
This TIMKEN bearing has a 1 1/8 in cylindrical bore, a cast iron not-split housing, and a square configuration with set screws. It is lubricated with NLGI 2 Lithium Complex Grease, uses a 3/8 in mounting bolt, and measures 4 1/4 in length. The system of measurement is inch.
Where to buy TIMKEN Flange Mount Bearings worldwide?
You can source the TIMKEN Flange Mount Bearing YCJ 1-1/8 SGT through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this part.
How to install a TIMKEN Flange Mount Bearing with set screws?
To install, align the bearing square flange against a flat mounting surface and secure it with bolts through the 3/8 in holes. Tighten the set screws onto the shaft using a hex key, ensuring the shaft is properly aligned. Apply moderate torque per TIMKEN guidelines to avoid housing distortion.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
