TIMKEN Flange Mount Bearing: Radial Ball, 1 1/8 in Bore, Cast Iron, Set Screws
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 1/8 in cylindrical bore, housed in a cast iron, not-split flange mount. It features set screws for shaft mounting, uses NLGI 2 Lithium…
SKU 3G-OTH-121425
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 1/8 in cylindrical bore, housed in a cast iron, not-split flange mount. It features set screws for shaft mounting, uses NLGI 2 Lithium Complex Grease lubrication, and requires a 1/2 in mounting bolt. This inch-system unit is identified by manufacturer part number YCJT 1-1/8 SGT.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN Flange Mount Bearing YCJT 1-1/8 SGT used for?
This general purpose flange-mount bearing supports rotating shafts in industrial equipment such as conveyors, fans, and material handling systems. Its cast iron housing and set-screw locking suit moderate loads and speeds in dry or lightly lubricated environments.
What are the specifications of the TIMKEN YCJT 1-1/8 SGT bearing?
It has a 1 1/8 in cylindrical bore, cast iron not-split housing, set-screw shaft locking, and NLGI 2 Lithium Complex Grease lubrication. Mounting bolt size is 1/2 in, overall length is 5 9/16 in, and it uses inch-system measurements. Manufacturer part number is YCJT 1-1/8 SGT.
Where to buy TIMKEN YCJT 1-1/8 SGT flange mount bearing worldwide?
3G Electric supplies the TIMKEN YCJT 1-1/8 SGT flange mount bearing worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this inch-system radial ball bearing globally.
How to install a TIMKEN set-screw flange mount bearing?
Align the housing squarely against the mounting surface and tighten bolts to the recommended torque for 1/2 in fasteners. Slide the bearing onto the shaft, then tighten the set screws evenly against the shaft. Apply moderate grease per NLGI 2 specifications and rotate manually to check for binding.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
