TIMKEN Flange Mount Bearing: Radial Ball, 1 5/8 in Bore, Cast Iron, Set Screws
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 5/8 in cylindrical bore, designed for inch-system applications. This unit features a cast iron, not-split housing with set screws and…
SKU 3G-OTH-111951
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 5/8 in cylindrical bore, designed for inch-system applications. This unit features a cast iron, not-split housing with set screws and is lubricated with NLGI 2 Lithium Complex Grease. It accommodates a 1/2 in mounting bolt size and is identified by manufacturer part number YCJ 1-5/8 SGT.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN Flange Mount Bearing used for?
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing used to support rotating shafts in industrial machinery. It is suitable for applications requiring inch-system measurements, such as conveyors, fans, and material handling equipment, where a cast iron housing with set screws provides secure shaft mounting.
What are the specifications of the TIMKEN Flange Mount Bearing YCJ 1-5/8 SGT?
This TIMKEN bearing has a 1 5/8 in cylindrical bore, cast iron not-split housing, and set screw locking. It uses NLGI 2 Lithium Complex Grease, accommodates a 1/2 in mounting bolt, and follows inch-system measurement. The manufacturer part number is YCJ 1-5/8 SGT.
Where to buy TIMKEN Flange Mount Bearing YCJ 1-5/8 SGT worldwide?
3G Electric supplies the TIMKEN Flange Mount Bearing YCJ 1-5/8 SGT worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this inch-system radial ball bearing.
How to install a TIMKEN Flange Mount Bearing with set screws?
To install, align the bearing unit on a flat surface and tighten the mounting bolts to the recommended torque. Secure the shaft by tightening the set screws evenly against the shaft flat. Apply NLGI 2 grease as needed. Always follow TIMKEN's generic installation guidelines for proper fit and alignment.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
