TRACXP Calibration Gas: TXP-T40, Nitrogen, Cylinder, 58 L Cylinder Capacity, Chlorine 5 ppm
The TRACXP TXP-T40 Calibration Gas (SKU 831R46, MPN 37-0090-4144-2) is a 58 L cylinder of nitrogen background gas with a chlorine mixture of 5 ppm, designed for use with TXP-T40 fixed gas detectors. This calibration…
SKU 3G-OTH-551861
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TRACXP TXP-T40 Calibration Gas (SKU 831R46, MPN 37-0090-4144-2) is a 58 L cylinder of nitrogen background gas with a chlorine mixture of 5 ppm, designed for use with TXP-T40 fixed gas detectors. This calibration gas enables accurate sensor verification and span adjustment for chlorine detection, supporting routine maintenance and compliance in industrial safety applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is TRACXP TXP-T40 calibration gas used for?
TRACXP TXP-T40 calibration gas is used to verify and adjust the span of TXP-T40 fixed gas detectors that monitor chlorine. It contains 5 ppm chlorine in a nitrogen background, enabling accurate sensor performance checks during routine industrial safety maintenance.
What are the specifications of TRACXP TXP-T40 calibration gas?
The TRACXP TXP-T40 calibration gas (MPN 37-0090-4144-2) is a 58 L cylinder with a nitrogen background and a chlorine mixture of 5 ppm. It is designed specifically for use with TXP-T40 fixed gas detectors for chlorine detection.
Where to buy TRACXP TXP-T40 calibration gas worldwide?
3G Electric supplies TRACXP TXP-T40 calibration gas worldwide. We handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this 58 L cylinder with 5 ppm chlorine in nitrogen.
How to use TRACXP TXP-T40 calibration gas for sensor verification?
Connect the TRACXP TXP-T40 calibration gas cylinder to the TXP-T40 detector's calibration port. Apply the 5 ppm chlorine mixture at the recommended flow rate, then follow the detector's manual to perform a span adjustment. Always use fresh gas and check the cylinder expiry date.
TRACXP Produk
3G Electric memasok TRACXP calibration gases for fixed gas detectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
