TRITAN 2 Bolt Flange Bearing: Radial Ball, 1/2 in Bore, Cast Iron, Set Screws
The TRITAN 2 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 1/2 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting and uses NLGI #2 equivalent…
SKU 3G-OTH-118500
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TRITAN 2 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 1/2 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting and uses NLGI #2 equivalent lubricant. The bearing has a 3/8 in mounting bolt size and a length of 3 57/64 in, with the manufacturer part number UCFL201-8S (40MM).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TRITAN 2 Bolt Flange Bearing used for?
The TRITAN 2 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing used to support rotating shafts in industrial machinery, conveyors, and material handling equipment. Its cast iron housing and set screw mounting provide reliable shaft retention in moderate-load applications.
What are the specifications of the TRITAN UCFL201-8S (40MM) flange bearing?
The TRITAN UCFL201-8S (40MM) has a 1/2 in cylindrical bore, cast iron housing, set screw shaft locking, and NLGI #2 equivalent lubricant. Mounting bolt size is 3/8 in, overall length is 3 57/64 in, and it uses inch system measurements. The manufacturer part number is UCFL201-8S (40MM).
Where to buy TRITAN flange bearings worldwide?
3G Electric supplies TRITAN flange bearings worldwide. As a global industrial distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us to source the TRITAN UCFL201-8S (40MM) or other models for your application.
How to install a TRITAN 2 Bolt Flange Bearing with set screws?
To install, clean the shaft and bore, slide the bearing onto the shaft, align the flange bolt holes, and tighten the mounting bolts. Then secure the bearing to the shaft by tightening the set screws evenly with a hex key. Use NLGI #2 equivalent grease for relubrication per TRITAN recommendations.
Digunakan dalam
Aplikasi umum untuk TRITANTRITAN Produk
3G Electric memasok TRITAN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
