USA INDUSTRIALS Pipe Nipple: 2 in Nominal Pipe Size, 60 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FD2) is a Schedule 40, galvanized steel pipe nipple with a 2-inch nominal pipe size, 60-inch length, and Male NPT x Male NPT connections threaded on both ends. It includes PTFE…
SKU 3G-OTH-464403
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FD2) is a Schedule 40, galvanized steel pipe nipple with a 2-inch nominal pipe size, 60-inch length, and Male NPT x Male NPT connections threaded on both ends. It includes PTFE thread sealant and has a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 2 in Schedule 40 galvanized pipe nipple used for?
This 2-inch Schedule 40 galvanized steel pipe nipple is used to connect two male NPT fittings in plumbing, gas, or compressed air systems. Its 60-inch length bridges gaps in piping runs, and the PTFE thread sealant ensures a leak-tight joint at pressures up to 125 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS pipe nipple ZUSA-PF-22429?
The USA INDUSTRIALS pipe nipple (MPN ZUSA-PF-22429) has a 2-inch nominal pipe size, 60-inch length, Schedule 40 wall thickness, and galvanized steel construction. It features Male NPT x Male NPT connections threaded on both ends, includes PTFE thread sealant, and is rated for 125 psi @ 72°F maximum operating pressure.
Where to buy USA INDUSTRIALS pipe nipple 407FD2 worldwide?
3G Electric supplies the USA INDUSTRIALS pipe nipple (SKU 407FD2) to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this Schedule 40 galvanized steel nipple.
How to install a threaded galvanized steel pipe nipple?
Apply PTFE tape or sealant to the male threads, then hand-tighten the nipple into the female fitting. Use a pipe wrench for final tightening—avoid overtightening to prevent thread damage. For the USA INDUSTRIALS nipple, ensure the PTFE sealant is evenly applied and the joint is rated for 125 psi @ 72°F.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
