USA INDUSTRIALS Pipe Nipple: 1/2 in Nominal Pipe Size, 12 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/2 in nominal pipe size and 12 in length. It features male NPT connections on both ends and is pre-applied with PTFE…
SKU 3G-OTH-464484
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/2 in nominal pipe size and 12 in length. It features male NPT connections on both ends and is pre-applied with PTFE thread sealant, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS pipe nipple used for?
A USA INDUSTRIALS pipe nipple connects two male NPT fittings in plumbing, pneumatic, or low-pressure fluid systems. This Schedule 40 galvanized steel nipple is suitable for water, air, and gas lines up to 125 psi at 72°F, with pre-applied PTFE sealant for leak-free joints.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22354 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22354 is a 1/2 in nominal pipe size, 12 in long, Schedule 40, galvanized steel, welded pipe nipple. It has male NPT x male NPT connections, PTFE thread sealant, and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver genuine Schedule 40 galvanized steel nipples like the ZUSA-PF-22354 to your facility, regardless of location.
How to install a galvanized steel pipe nipple with PTFE sealant?
Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1-2 turns. The pre-applied PTFE sealant eliminates the need for tape or dope. Avoid over-tightening to prevent thread damage. For pressures up to 125 psi @ 72°F, ensure proper support.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
