USA INDUSTRIALS Pipe Nipple: 1/4 in Nominal Pipe Size, 48 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/4 in nominal pipe size and 48 in length. It features male NPT connections on both ends with PTFE thread sealant, rated…
SKU 3G-OTH-464509
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/4 in nominal pipe size and 48 in length. It features male NPT connections on both ends with PTFE thread sealant, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This 1/4 in nominal pipe size, 48 in long, Schedule 40 galvanized steel nipple with male NPT threads on both ends is used to connect piping components in low-pressure water, air, and gas systems. The PTFE thread sealant helps ensure leak-free joints in industrial plumbing and pneumatic applications.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22373 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22373 is a Schedule 40, galvanized steel, welded pipe nipple with a 1/4 in nominal pipe size, 48 in length, male NPT x male NPT connections, PTFE thread sealant, and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the ZUSA-PF-22373 or other Schedule 40 galvanized nipples.
How to install a threaded galvanized pipe nipple with PTFE sealant?
Apply additional PTFE tape or pipe dope to the male threads for extra sealing. Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1-2 turns. Avoid overtightening to prevent thread damage. Ensure the pipe is supported to avoid stress on the joint.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
