USA INDUSTRIALS Pipe Nipple: 3/4 in Nominal Pipe Size, 12 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 3/4 in nominal pipe size and 12 in length. It features male NPT x male NPT connections with PTFE thread sealant applied on…
SKU 3G-OTH-464466
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 3/4 in nominal pipe size and 12 in length. It features male NPT x male NPT connections with PTFE thread sealant applied on both ends, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This pipe nipple connects two male NPT fittings in plumbing, compressed air, and low-pressure fluid systems. Its galvanized steel construction resists corrosion in industrial environments. 3G Electric supplies this USA INDUSTRIALS component across 14 industrial departments, including pneumatics and instrumentation.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22465 pipe nipple?
This Schedule 40 pipe nipple has a 3/4 in nominal pipe size, 12 in length, galvanized steel construction, and male NPT x male NPT connections. PTFE thread sealant is applied on both ends. Maximum operating pressure is 125 psi @ 72°F. 3G Electric sources this USA INDUSTRIALS part globally.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 galvanized nipple with PTFE sealant.
How to install a threaded galvanized pipe nipple?
Apply additional PTFE tape or pipe dope to the male threads if needed. Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex section for final tightening. Avoid overtightening to prevent thread damage. 3G Electric provides technical support for this USA INDUSTRIALS component.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
