USA INDUSTRIALS Pipe Nipple: 2 in Nominal Pipe Size, 18 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FD7) is a Schedule 40, galvanized steel nipple with a 2-inch nominal pipe size and 18-inch length, threaded on both ends with Male NPT x Male NPT connections and pre-applied…
SKU 3G-OTH-464408
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FD7) is a Schedule 40, galvanized steel nipple with a 2-inch nominal pipe size and 18-inch length, threaded on both ends with Male NPT x Male NPT connections and pre-applied PTFE thread sealant. It has a maximum operating pressure of 125 psi at 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This 2-inch NPT pipe nipple connects two male-threaded fittings in industrial plumbing, compressed air, or water systems. The galvanized steel resists corrosion, and the pre-applied PTFE sealant ensures a leak-tight joint at pressures up to 125 psi at 72°F.
What are the specifications of the USA INDUSTRIALS 2-inch pipe nipple?
This Schedule 40 nipple has a 2-inch nominal pipe size, 18-inch length, galvanized steel construction, and Male NPT x Male NPT connections. It includes pre-applied PTFE thread sealant and is rated for a maximum operating pressure of 125 psi at 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies and delivers USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a threaded pipe nipple with PTFE sealant?
Apply pipe dope or additional PTFE tape over the pre-applied sealant for extra security. Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1–2 turns. Avoid overtightening to prevent cracking the galvanized coating.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
