USA INDUSTRIALS Pipe Nipple: 1 1/4 in Nominal Pipe Size, 5 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FH5) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/4 in nominal pipe size and 5 in length. It features Male NPT x Male NPT connections with PTFE thread…
SKU 3G-OTH-464446
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FH5) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/4 in nominal pipe size and 5 in length. It features Male NPT x Male NPT connections with PTFE thread sealant applied, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS pipe nipple used for?
This Schedule 40 galvanized steel pipe nipple connects two male NPT threaded fittings in industrial plumbing, compressed air, and low-pressure fluid systems. It is rated for 125 psi @ 72°F and includes PTFE thread sealant for leak-resistant joints.
What are the specifications of the USA INDUSTRIALS pipe nipple?
The USA INDUSTRIALS pipe nipple (MPN ZUSA-PF-22404) has a 1 1/4 in nominal pipe size, 5 in length, Schedule 40 wall thickness, galvanized steel construction, and Male NPT x Male NPT connections. Maximum operating pressure is 125 psi @ 72°F with PTFE thread sealant applied.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies and delivers USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, regardless of location.
How to install a galvanized steel pipe nipple?
Apply additional PTFE tape or pipe dope to the male threads if needed, then hand-tighten the nipple into the female fitting. Use two wrenches—one on the nipple and one on the fitting—to avoid over-torquing. Do not exceed 125 psi @ 72°F operating pressure.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
