USA INDUSTRIALS Pipe Nipple: 1/2 in Nominal Pipe Size, 7 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FN7) is a Schedule 40, galvanized steel pipe nipple with a 1/2 in nominal pipe size, 7 in length, and male NPT threads on both ends. It features pre-applied PTFE thread sealant…
SKU 3G-OTH-464486
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FN7) is a Schedule 40, galvanized steel pipe nipple with a 1/2 in nominal pipe size, 7 in length, and male NPT threads on both ends. It features pre-applied PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS pipe nipple used for?
A USA INDUSTRIALS pipe nipple connects two female NPT fittings in plumbing, pneumatic, or low-pressure fluid systems. This 1/2 in Schedule 40 galvanized steel nipple with pre-applied PTFE sealant is rated for 125 psi @ 72°F, suitable for water, air, and gas lines in industrial and commercial applications.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22356 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22356 is a 1/2 in nominal pipe size, 7 in long, Schedule 40 galvanized steel nipple. It has male NPT threads on both ends, pre-applied PTFE thread sealant, and a maximum operating pressure of 125 psi @ 72°F. The connection type is Male NPT x Male NPT.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the ZUSA-PF-22356 or other sizes. We source genuine industrial equipment across 14 departments, including plumbing and pneumatics.
How to install a threaded pipe nipple with PTFE sealant?
Clean both male threads and the female fitting. Apply additional PTFE tape if needed, wrapping clockwise. Hand-tighten the nipple into the fitting, then use wrenches on the nipple's hex section for final tightening—avoid over-torquing galvanized steel. The pre-applied sealant on USA INDUSTRIALS nipples helps prevent leaks at pressures up to 125 psi.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
