USA INDUSTRIALS Pipe Nipple: 1 1/4 in Nominal Pipe Size, 3 1/2 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FH7) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/4 in nominal pipe size and 3 1/2 in length. It features Male NPT x Male NPT connections, PTFE thread…
SKU 3G-OTH-464448
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FH7) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/4 in nominal pipe size and 3 1/2 in length. It features Male NPT x Male NPT connections, PTFE thread sealant applied, and a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS pipe nipple used for?
This galvanized steel pipe nipple connects two male NPT threaded fittings in plumbing, compressed air, and low-pressure fluid systems. It is suitable for applications requiring a durable, corrosion-resistant joint up to 125 psi at 72°F.
What are the specifications of the USA INDUSTRIALS pipe nipple?
The pipe nipple has a 1 1/4 in nominal size, 3 1/2 in length, Schedule 40 wall, galvanized steel construction, and Male NPT x Male NPT connections. It includes PTFE thread sealant and is rated for 125 psi maximum operating pressure at 72°F.
Where to buy USA INDUSTRIALS pipe nipple worldwide?
3G Electric supplies and delivers the USA INDUSTRIALS pipe nipple worldwide. We handle full logistics and customs clearance, ensuring you receive the correct Schedule 40 galvanized steel nipple with PTFE sealant for your industrial application.
How to install a USA INDUSTRIALS pipe nipple?
Apply additional PTFE tape or pipe dope to the male threads if needed, then hand-tighten into the female fitting. Use wrenches on the nipple's hex section to achieve a leak-free seal without over-tightening. Do not exceed 125 psi operating pressure.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
