USA INDUSTRIALS Pipe Nipple: 1 in Nominal Pipe Size, 6 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FK1) is a Schedule 40, galvanized steel nipple with a 1 in nominal pipe size, 6 in length, and Male NPT x Male NPT threads on both ends. It features a PTFE thread sealant and…
SKU 3G-OTH-464455
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FK1) is a Schedule 40, galvanized steel nipple with a 1 in nominal pipe size, 6 in length, and Male NPT x Male NPT threads on both ends. It features a PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS pipe nipple used for?
This Schedule 40 galvanized steel pipe nipple connects two male NPT fittings in plumbing, pneumatic, and low-pressure fluid systems. It is rated for 125 psi @ 72°F and includes PTFE thread sealant for leak-resistant joints in industrial piping applications.
What are the specifications of the USA INDUSTRIALS pipe nipple?
The USA INDUSTRIALS pipe nipple (MPN ZUSA-PF-22325) has a 1 in nominal pipe size, 6 in length, Schedule 40 wall, galvanized steel construction, and Male NPT x Male NPT threads on both ends. Maximum operating pressure is 125 psi @ 72°F with PTFE thread sealant.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to customers worldwide. We handle full logistics, customs clearance, and delivery for this Schedule 40 galvanized steel nipple. Contact our team to order the 1 in x 6 in threaded nipple for your industrial project.
How to install a threaded pipe nipple with PTFE sealant?
Apply additional PTFE tape or paste to the male threads if needed, then hand-tighten the nipple into the female fitting. Use wrenches on both ends to avoid over-torquing. For the USA INDUSTRIALS nipple, do not exceed 125 psi @ 72°F operating pressure to maintain joint integrity.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
