USA INDUSTRIALS Pipe Nipple: 1 1/2 in Nominal Pipe Size, 2 1/2 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/2 in nominal pipe size and 2 1/2 in length. It features Male NPT x Male NPT connections, is threaded on both ends with…
SKU 3G-OTH-464433
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/2 in nominal pipe size and 2 1/2 in length. It features Male NPT x Male NPT connections, is threaded on both ends with PTFE thread sealant, and has a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS pipe nipple used for?
This Schedule 40 galvanized steel pipe nipple connects two male NPT threaded fittings in industrial plumbing, compressed air, and low-pressure fluid systems. Its PTFE sealant helps prevent leaks at joints, making it suitable for applications up to 125 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22382 pipe nipple?
This pipe nipple has a 1 1/2 in nominal pipe size, 2 1/2 in length, Schedule 40 wall, galvanized steel construction, and welded seam. It features Male NPT x Male NPT connections with PTFE thread sealant and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to global customers. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for pricing and lead time on this Schedule 40 galvanized steel nipple with PTFE sealant.
How to install a galvanized steel pipe nipple with PTFE sealant?
Apply additional PTFE tape or pipe dope to the male threads if needed, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex section to achieve a snug seal without over-tightening. Avoid damaging the galvanized coating during installation.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
