USA INDUSTRIALS Pipe Nipple: 1 1/2 in Nominal Pipe Size, 12 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FF4) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/2 in nominal pipe size and 12 in length. It features Male NPT x Male NPT connections, is threaded on both…
SKU 3G-OTH-464425
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FF4) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/2 in nominal pipe size and 12 in length. It features Male NPT x Male NPT connections, is threaded on both ends with PTFE thread sealant, and has a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS pipe nipple used for?
This USA INDUSTRIALS Schedule 40 galvanized steel pipe nipple connects two male NPT threaded fittings in industrial plumbing, compressed air, and low-pressure fluid systems. Its 12 in length bridges gaps in piping runs, and the PTFE thread sealant helps ensure leak-free joints up to 125 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS pipe nipple?
The USA INDUSTRIALS pipe nipple (MPN ZUSA-PF-22389) has a 1 1/2 in nominal pipe size, 12 in length, Schedule 40 wall, galvanized steel construction, and Male NPT x Male NPT connections. It includes PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipple worldwide?
3G Electric supplies the USA INDUSTRIALS pipe nipple (SKU 407FF4) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 galvanized steel nipple with PTFE sealant.
How to install a threaded pipe nipple with PTFE sealant?
Apply additional PTFE tape or paste to the male threads if needed, then hand-tighten the nipple into the female fitting. Use two wrenches—one on the nipple, one on the fitting—to avoid over-torquing. Do not exceed 125 psi @ 72°F. Always check for leaks after pressurization.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
