USA INDUSTRIALS Pipe Nipple: 1 in Nominal Pipe Size, 5 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (MPN ZUSA-PF-22324) is a Schedule 40, galvanized steel nipple with a 1 in nominal pipe size, 5 in length, and Male NPT x Male NPT connections. It features PTFE thread sealant applied…
SKU 3G-OTH-464456
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (MPN ZUSA-PF-22324) is a Schedule 40, galvanized steel nipple with a 1 in nominal pipe size, 5 in length, and Male NPT x Male NPT connections. It features PTFE thread sealant applied to both threaded ends and has a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 pipe nipple used for?
This galvanized steel pipe nipple connects two male NPT fittings in plumbing, pneumatic, or low-pressure fluid systems. Its 1 in nominal size and 5 in length suit tight spaces where a short, threaded connector is needed. PTFE sealant on both ends helps prevent leaks.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22324 pipe nipple?
This pipe nipple has a 1 in nominal pipe size, 5 in length, Schedule 40 wall thickness, and is made of galvanized steel. Connections are Male NPT x Male NPT with PTFE thread sealant applied. Maximum operating pressure is 125 psi at 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples like the ZUSA-PF-22324 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this Schedule 40 galvanized nipple with PTFE sealant.
How to install a threaded pipe nipple with PTFE sealant?
Clean both male threads, then apply additional PTFE tape if needed (factory sealant is pre-applied). Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex section for final tightening. Avoid over-tightening to prevent thread damage.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
