USA INDUSTRIALS Pipe Nipple: 1/2 in Nominal Pipe Size, 48 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/2 in nominal pipe size and 48 in length. It features Male NPT x Male NPT connections, is threaded on both ends with PTFE…
SKU 3G-OTH-464479
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/2 in nominal pipe size and 48 in length. It features Male NPT x Male NPT connections, is threaded on both ends with PTFE thread sealant, and has a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 pipe nipple used for?
This galvanized steel pipe nipple connects two male NPT fittings in plumbing, compressed air, and low-pressure fluid systems. Its 48-inch length bridges gaps in piping runs, while the PTFE thread sealant ensures leak-free joints up to 125 psi at 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22342 pipe nipple?
This Schedule 40 pipe nipple has a 1/2-inch nominal size, 48-inch length, and galvanized steel construction. It features Male NPT x Male NPT connections with PTFE thread sealant, rated for 125 psi at 72°F. The welded design meets standard industrial requirements.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to global customers. We handle full logistics, customs clearance, and delivery worldwide. Contact us for pricing and lead time on this ZUSA-PF-22342 Schedule 40 galvanized nipple.
How to install a threaded galvanized pipe nipple?
Apply pipe joint compound or PTFE tape to the male threads, then hand-tighten into the female fitting. Use wrenches on the nipple's hex ends for final tightening—avoid over-torquing galvanized steel. Ensure the PTFE sealant is compatible with your system's pressure and temperature.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
