USA INDUSTRIALS Pipe Nipple: 1 1/4 in Nominal Pipe Size, 60 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/4 in nominal pipe size and 60 in length. It features Male NPT x Male NPT connections with PTFE thread sealant applied…
SKU 3G-OTH-464436
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/4 in nominal pipe size and 60 in length. It features Male NPT x Male NPT connections with PTFE thread sealant applied, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized steel pipe nipple used for?
This pipe nipple connects two male NPT threaded fittings in industrial plumbing, compressed air, or water systems. Its galvanized steel construction resists corrosion, and the PTFE thread sealant helps ensure a leak-free joint at pressures up to 125 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22414 pipe nipple?
This Schedule 40 pipe nipple has a 1 1/4 in nominal pipe size, 60 in length, and is made of galvanized steel with welded construction. It features Male NPT x Male NPT connections with PTFE thread sealant, rated for a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 galvanized steel nipple with PTFE sealant.
How to install a threaded galvanized steel pipe nipple?
Apply additional PTFE tape or pipe dope to the male threads if needed, then hand-tighten into the female fitting. Use two wrenches—one on the nipple and one on the fitting—to avoid over-torquing. Do not exceed 125 psi @ 72°F operating pressure.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
