USA INDUSTRIALS Pipe Nipple: 3/8 in Nominal Pipe Size, 3 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FT2) is a Schedule 40, galvanized steel pipe nipple threaded on both ends with PTFE thread sealant. It features a 3/8 in nominal pipe size, 3 in length, and Male NPT x Male NPT…
SKU 3G-OTH-464503
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FT2) is a Schedule 40, galvanized steel pipe nipple threaded on both ends with PTFE thread sealant. It features a 3/8 in nominal pipe size, 3 in length, and Male NPT x Male NPT connections, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 3/8 in pipe nipple used for?
This galvanized steel pipe nipple connects two female NPT fittings in plumbing, pneumatic, or low-pressure fluid systems. Rated for 125 psi @ 72°F, it is suitable for air, water, and oil lines in industrial maintenance, HVAC, and process piping applications.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22479 pipe nipple?
The USA INDUSTRIALS pipe nipple has a 3/8 in nominal size, 3 in length, Schedule 40 wall, galvanized steel construction, and Male NPT x Male NPT connections. It includes PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 galvanized steel nipple.
How to install a threaded galvanized steel pipe nipple?
Apply additional PTFE tape or pipe dope to the male threads for a leak-free seal. Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex section for final tightening—avoid overtightening to prevent thread damage. Test at operating pressure.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
