USA INDUSTRIALS Pipe Nipple: 1/4 in Nominal Pipe Size, 60 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/4 in nominal pipe size and 60 in length. It features male NPT x male NPT connections with PTFE thread sealant applied on…
SKU 3G-OTH-464508
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/4 in nominal pipe size and 60 in length. It features male NPT x male NPT connections with PTFE thread sealant applied on both ends, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This 1/4 in nominal pipe size, 60 in long, Schedule 40 galvanized steel pipe nipple is used for connecting piping systems in industrial plumbing, compressed air, and low-pressure fluid applications. Its male NPT threads with PTFE sealant provide a reliable, leak-resistant joint.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22372 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22372 is a Schedule 40, galvanized steel, welded pipe nipple with 1/4 in nominal pipe size, 60 in length, male NPT x male NPT connections, PTFE thread sealant applied, and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies and delivers USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a galvanized steel pipe nipple with PTFE sealant?
Apply additional PTFE tape or pipe dope to the male NPT threads if needed, then hand-tighten the nipple into the female fitting. Use a wrench for final tightening, but avoid overtightening to prevent thread damage. Ensure the pipe is supported along its 60 in length to reduce stress.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
