USA INDUSTRIALS Pipe Nipple: 1 in Nominal Pipe Size, 1 1/2 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, fully threaded nipple with a 1 in nominal pipe size and 1 1/2 in length. It features Male NPT x Male NPT connections and PTFE thread sealant, with a…
SKU 3G-OTH-484007
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, fully threaded nipple with a 1 in nominal pipe size and 1 1/2 in length. It features Male NPT x Male NPT connections and PTFE thread sealant, with a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 pipe nipple used for?
This galvanized steel pipe nipple connects two male NPT threaded fittings in plumbing, compressed air, and low-pressure fluid systems. Rated for 125 psi at 72°F, it is suitable for water, gas, and air distribution in industrial and commercial applications.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22315 pipe nipple?
This pipe nipple has a 1 in nominal pipe size, 1 1/2 in length, Schedule 40 wall thickness, and is made of galvanized steel. It features Male NPT x Male NPT connections with PTFE thread sealant and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 galvanized steel nipple with PTFE sealant.
How to install a fully threaded galvanized steel pipe nipple?
Apply PTFE tape or pipe dope to both male NPT threads, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex section for final tightening—avoid overtightening to prevent thread damage. Ensure the system is depressurized before installation.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 fully threaded pipe nipples with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
