USA INDUSTRIALS Pipe Nipple: 3/8 in Nominal Pipe Size, 1 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (MPN ZUSA-PF-22322) is a Schedule 40, galvanized steel, fully threaded nipple with a 3/8 in nominal pipe size and 1 in length. It features Male NPT x Male NPT connections and PTFE…
SKU 3G-OTH-484010
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (MPN ZUSA-PF-22322) is a Schedule 40, galvanized steel, fully threaded nipple with a 3/8 in nominal pipe size and 1 in length. It features Male NPT x Male NPT connections and PTFE thread sealant, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This 3/8 in pipe nipple connects two male NPT threaded fittings in low-pressure galvanized steel piping systems. It is commonly used in water, air, and gas lines where corrosion resistance and a leak-tight seal are required, with PTFE thread sealant pre-applied.
What are the specifications of the USA INDUSTRIALS pipe nipple ZUSA-PF-22322?
The USA INDUSTRIALS pipe nipple has a 3/8 in nominal pipe size, 1 in length, Schedule 40 wall thickness, and is made of galvanized steel. It features Male NPT x Male NPT connections with PTFE thread sealant and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 galvanized nipple.
How to install a galvanized steel pipe nipple with PTFE sealant?
Ensure threads are clean and dry. Apply additional PTFE tape if needed, wrapping clockwise. Hand-tighten the nipple into the female fitting, then use wrenches on both ends to avoid over-torquing. Do not exceed 125 psi @ 72°F operating pressure.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 fully threaded pipe nipples with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
