USA INDUSTRIALS Metal Pipe Elbow: 2 in x 2 in, Threaded x Threaded, Class 150, 150 psi
The USA INDUSTRIALS Metal Pipe Elbow is a low-pressure threaded pipe fitting, specifically a 2 in x 2 in, 45° elbow made of malleable iron. It features a Class 150 rating with a maximum operating pressure of 150 psi…
SKU 3G-OTH-478182
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Metal Pipe Elbow is a low-pressure threaded pipe fitting, specifically a 2 in x 2 in, 45° elbow made of malleable iron. It features a Class 150 rating with a maximum operating pressure of 150 psi and includes PTFE thread sealant for a secure, threaded x threaded connection.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 2 in x 2 in 45° pipe elbow used for?
This malleable iron elbow changes flow direction by 45° in low-pressure piping systems up to 150 psi. It is commonly used in industrial plumbing, compressed air, and water lines where a threaded x threaded connection with PTFE sealant is required.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-23212 pipe elbow?
This 45° elbow has a 2 in x 2 in threaded x threaded connection, Class 150 rating, maximum operating pressure of 150 psi, and is made of malleable iron. It includes PTFE thread sealant. The manufacturer part number is ZUSA-PF-23212.
Where to buy USA INDUSTRIALS pipe fittings worldwide?
3G Electric supplies USA INDUSTRIALS pipe fittings like the ZUSA-PF-23212 elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this malleable iron 45° elbow.
How to install a threaded pipe elbow with PTFE sealant?
Apply PTFE tape clockwise around male threads, then hand-tighten the elbow onto the pipe. Use wrenches on both fittings to avoid over-torquing malleable iron. Do not exceed 150 psi operating pressure. Always test the joint for leaks before system startup.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
