USA INDUSTRIALS Plug: 1 in, Threaded, Class 150, 150 psi @ 72°F, Plug
The USA INDUSTRIALS Low-Pressure Threaded Pipe Fitting is a 1-inch threaded plug made of malleable iron, rated Class 150 with a maximum operating pressure of 150 psi at 72°F. This plug is supplied with thread sealant…
SKU 3G-OTH-478164
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Low-Pressure Threaded Pipe Fitting is a 1-inch threaded plug made of malleable iron, rated Class 150 with a maximum operating pressure of 150 psi at 72°F. This plug is supplied with thread sealant for reliable sealing in low-pressure piping systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 1-inch threaded plug used for?
This malleable iron plug seals open ends in low-pressure piping systems up to 150 psi at 72°F. It is commonly used in water, air, and steam lines where a reliable, leak-proof closure is needed. The pre-applied thread sealant simplifies installation.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-23066 plug?
This plug is 1-inch, threaded, Class 150, with a maximum operating pressure of 150 psi at 72°F. It is made of malleable iron and includes thread sealant. The manufacturer part number is ZUSA-PF-23066.
Where to buy USA INDUSTRIALS pipe fittings in worldwide?
3G Electric supplies USA INDUSTRIALS low-pressure threaded pipe fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the ZUSA-PF-23066 plug.
How to install a threaded pipe plug with sealant?
Clean the male threads and apply pipe thread sealant if not pre-applied. Hand-tighten the plug into the fitting, then use a wrench for an additional 1-2 turns. Do not overtighten malleable iron. Test the joint at system pressure to verify seal integrity.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
