Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
VEKTEK VGP-160-C1 Two-Finger Parallel Gripper - Two-Finger Parallel Grippers
VEKTEKTwo-Finger Parallel Grippers

VEKTEK VGP-160-C1 Two-Finger Parallel Gripper

Gripper paralel dua jari VEKTEK seri VGP-160-C1 adalah solusi end-of-arm tooling yang dirancang untuk aplikasi otomatisasi industri. Dengan tekanan operasi maksimal 8 bar dan minimal 2 bar, gripper ini menawarkan…

SKU 3G-OTH-623065

Juga terdaftar sebagai: VGP160C1 · VGP 160 C1

Merek
VEKTEK
Item
VGP-160-C1 Two-Finger Parallel Gripper
Kategori
Two-Finger Parallel Grippers
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

VEKTEK
Manufacturer Part Number
VGP-160-C1
Type
2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

VEKTEK Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Gripper paralel dua jari VEKTEK seri VGP-160-C1 adalah solusi end-of-arm tooling yang dirancang untuk aplikasi otomatisasi industri. Dengan tekanan operasi maksimal 8 bar dan minimal 2 bar, gripper ini menawarkan stroke 16 mm yang presisi untuk penanganan komponen. Produk ini memiliki tingkat perlindungan IP40, cocok untuk lingkungan pabrik yang memerlukan keandalan tinggi. Cari gripper VEKTEK untuk lengan robot? VGP-160-C1 adalah pilihan tepat.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi gripper VEKTEK VGP-160-C1?

Gripper VEKTEK VGP-160-C1 adalah two-finger parallel gripper dengan tekanan operasi 2 bar hingga 8 bar, tekanan maksimal 8 bar, dan tekanan minimal 2 bar. Produk ini memiliki tingkat perlindungan IP40 dan stroke 16 mm, dirancang untuk end-of-arm tooling pada sistem otomatisasi.

Untuk apa gripper VEKTEK VGP-160-C1 digunakan?

Gripper VEKTEK VGP-160-C1 digunakan sebagai end-of-arm tooling pada lengan robot untuk mencengkeram dan memindahkan komponen dalam proses produksi otomatis. Dengan tekanan operasi 2 bar hingga 8 bar, gripper ini ideal untuk aplikasi perakitan, pengepakan, dan material handling di industri manufaktur.

Di mana beli gripper VEKTEK VGP-160-C1 di Indonesia?

Anda dapat membeli gripper VEKTEK VGP-160-C1 melalui 3G Electric, distributor resmi yang memasok peralatan industri ke Indonesia. Kami menangani logistik dan bea cukai sehingga produk sampai ke lokasi Anda dengan aman. Hubungi kami untuk minta penawaran.

Bagaimana cara memilih gripper paralel yang tepat?

Pilih gripper paralel berdasarkan tekanan operasi, stroke, dan aplikasi. VEKTEK VGP-160-C1 memiliki tekanan operasi 2 bar hingga 8 bar, stroke 16 mm, dan perlindungan IP40. Pastikan gripper sesuai dengan beban dan lingkungan kerja, seperti untuk end-of-arm tooling pada lengan robot.

Digunakan dalam

Aplikasi umum untuk VEKTEK
Machining centers — VEKTEK zero point system fixture plates for quick workpiece changeover
Robotic assembly — VEKTEK robot coupler PQ9020 for EOAT interfaces on ISO 31.5-4-M5 flanges
Workholding — VEKTEK swing clamp hydraulic cylinders for clamping parts during milling operations
Automated gripping — VEKTEK parallel gripper jaw blanks for custom jaw fabrication in VGP/VZP series
Fixture setup — VEKTEK zero point system pull studs for securing workpieces to subplates
Tooling change — VEKTEK quick-change jaw adapters for rapid gripper jaw replacement in VY series

VEKTEK Produk

3G Electric memasok VEKTEK two-finger parallel grippers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari VEKTEK

Lihat semua VEKTEK suku cadang →
Pneumatic two-finger parallel gripper with 14 mm stroke, operating at 2 bar to 8 bar. Max operating pressure 8 bar, min 2 bar. IP40 rated. Used in end-of-arm tooling for pick-and-place, assembly, and material handling
VEKTEK
Pneumatic two-finger parallel gripper with 14 mm stroke, operating at 2 bar to 8 bar. Max operating pressure 8 bar, min 2 bar. IP40 rated. Used in end-of-arm tooling for pick-and-place, assembly, and material handling
Pneumatic two-finger parallel gripper with 4 mm stroke length. Operates at 2 bar to 8 bar (8 bar max, 2 bar min operating pressure). IP40 protection rating. Suitable for pick-and-place, assembly, and material handling tasks in industrial automation
VEKTEK
Pneumatic two-finger parallel gripper with 4 mm stroke length. Operates at 2 bar to 8 bar (8 bar max, 2 bar min operating pressure). IP40 protection rating. Suitable for pick-and-place, assembly, and material handling tasks in industrial automation
Pneumatic two-finger parallel gripper with 13 mm stroke, operating pressure 2.5 bar to 8 bar (max 8 bar), overall length 154 mm, IP67 rated. Used for picking, placing, and assembling parts in end-of-arm tooling
VEKTEK
Pneumatic two-finger parallel gripper with 13 mm stroke, operating pressure 2.5 bar to 8 bar (max 8 bar), overall length 154 mm, IP67 rated. Used for picking, placing, and assembling parts in end-of-arm tooling
Two-finger parallel gripper with 6 mm stroke, operating at 2 bar to 8 bar (8 bar max, 2 bar min). Suitable for end-of-arm tooling in pick-and-place, assembly, and part handling applications
VEKTEK
Two-finger parallel gripper with 6 mm stroke, operating at 2 bar to 8 bar (8 bar max, 2 bar min). Suitable for end-of-arm tooling in pick-and-place, assembly, and part handling applications
Pneumatic two-finger parallel gripper with 17 mm stroke. Operates at 2 bar to 8 bar, with maximum operating pressure of 8 bar and minimum of 2 bar. Suitable for end-of-arm tooling in automated manufacturing for picking, placing, and holding parts
VEKTEK
Pneumatic two-finger parallel gripper with 17 mm stroke. Operates at 2 bar to 8 bar, with maximum operating pressure of 8 bar and minimum of 2 bar. Suitable for end-of-arm tooling in automated manufacturing for picking, placing, and holding parts
Two-finger parallel gripper with 2.5 mm stroke, operating at 2 bar to 8 bar (8 bar max, 2 bar min). IP40 rating. Used in end-of-arm tooling for pick-and-place, assembly, and material handling in automated manufacturing
VEKTEK
Two-finger parallel gripper with 2.5 mm stroke, operating at 2 bar to 8 bar (8 bar max, 2 bar min). IP40 rating. Used in end-of-arm tooling for pick-and-place, assembly, and material handling in automated manufacturing
Pneumatic two-finger parallel gripper with 30 mm stroke. Operates at 2 bar to 8 bar, with maximum 8 bar and minimum 2 bar. IP40 rated. Suitable for end-of-arm tooling in automated assembly for picking, placing, and holding parts
VEKTEK
Pneumatic two-finger parallel gripper with 30 mm stroke. Operates at 2 bar to 8 bar, with maximum 8 bar and minimum 2 bar. IP40 rated. Suitable for end-of-arm tooling in automated assembly for picking, placing, and holding parts
Two-finger parallel gripper with 4 mm stroke, operating from 2.5 bar to 8 bar with 8 bar maximum pressure. IP67 rated for dust and water ingress protection. Used in end-of-arm tooling for pick-and-place, assembly, and part handling
VEKTEK
Two-finger parallel gripper with 4 mm stroke, operating from 2.5 bar to 8 bar with 8 bar maximum pressure. IP67 rated for dust and water ingress protection. Used in end-of-arm tooling for pick-and-place, assembly, and part handling