WEATHERHEAD Compression Fitting Union: 1/4 in OD x 1/4 in OD Fitting Size
The WEATHERHEAD Compression Fitting Union (MPN 62X4) is a standard sleeve brass compression fitting with a 1/4 in OD x 1/4 in OD fitting size and Compression x Compression type. 3G Electric sources this genuine…
SKU 3G-OTH-482225
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The WEATHERHEAD Compression Fitting Union (MPN 62X4) is a standard sleeve brass compression fitting with a 1/4 in OD x 1/4 in OD fitting size and Compression x Compression type. 3G Electric sources this genuine industrial component across 14 departments, with specialist expertise in combustion, pumps, and controls ensuring accurate sourcing and support.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a WEATHERHEAD compression fitting union used for?
A WEATHERHEAD compression fitting union connects two tubes of the same outside diameter in a leak-tight seal without soldering or threading. It is commonly used in instrumentation, pneumatic, and hydraulic systems where reliable, removable connections are needed in tight spaces.
What are the specifications of the WEATHERHEAD 62X4 compression fitting?
The WEATHERHEAD 62X4 is a standard sleeve brass compression fitting union with a 1/4 in OD x 1/4 in OD fitting size and Compression x Compression type. It is manufactured by WEATHERHEAD under part number 62X4 and is suitable for low- to medium-pressure fluid and gas applications.
Where to buy WEATHERHEAD compression fittings worldwide?
3G Electric supplies genuine WEATHERHEAD compression fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the 62X4 union or any WEATHERHEAD part.
How to install a WEATHERHEAD compression fitting union?
To install a WEATHERHEAD compression fitting union, slide the nut and sleeve onto the tube, insert the tube into the fitting body until it seats, then tighten the nut by hand followed by a wrench turn. Avoid over-tightening to prevent sleeve deformation. Always use the correct tube size and material.
Digunakan dalam
Aplikasi umum untuk WEATHERHEADWEATHERHEAD Produk
3G Electric memasok WEATHERHEAD standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
