WEATHERHEAD Compression Fitting Union: 3/8 in OD x 3/8 in OD Fitting Size
The WEATHERHEAD Compression Fitting Union (MPN 62X6) is a standard sleeve brass compression fitting with a 3/8 in OD x 3/8 in OD fitting size and a Compression x Compression type. 3G Electric sources this genuine…
SKU 3G-OTH-482005
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The WEATHERHEAD Compression Fitting Union (MPN 62X6) is a standard sleeve brass compression fitting with a 3/8 in OD x 3/8 in OD fitting size and a Compression x Compression type. 3G Electric sources this genuine industrial component across 14 departments, with specialist expertise in combustion, pumps, and controls ensuring accurate sourcing and support.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a WEATHERHEAD Compression Fitting Union used for?
A WEATHERHEAD Compression Fitting Union (MPN 62X6) connects two 3/8 in OD tubes in fluid or gas systems. It is used in industrial applications such as instrumentation, pneumatic controls, and hydraulic lines where a leak-tight, removable joint is needed without soldering or threading.
What are the specifications of the WEATHERHEAD 62X6 compression fitting?
The WEATHERHEAD 62X6 is a standard sleeve brass compression fitting union. It has a 3/8 in OD x 3/8 in OD fitting size and a Compression x Compression type. The brand is WEATHERHEAD, and the manufacturer part number is 62X6.
Where to buy WEATHERHEAD compression fittings in worldwide?
3G Electric supplies WEATHERHEAD compression fittings like the 62X6 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial sourcing partner, we provide genuine components across 14 departments, including specialist expertise in combustion, pumps, and controls.
How to install a WEATHERHEAD compression fitting union?
To install a WEATHERHEAD compression fitting union, slide the nut and sleeve onto the tube, insert the tube into the fitting body, and tighten the nut by hand, then use a wrench for an additional 1/4 to 1/2 turn. Avoid overtightening to prevent tube deformation. Always follow the manufacturer's instructions for proper sealing.
Digunakan dalam
Aplikasi umum untuk WEATHERHEADWEATHERHEAD Produk
3G Electric memasok WEATHERHEAD standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
