WIKA Pressure Transmitter: 0 psi to 15,000 psi, 5V, 1/2 in NPT Male Conduit with Free Ends
The WIKA E-10 Pressure Transmitter (SKU 412PA4) is a stainless steel pressure transmitter with a 0 psi to 15,000 psi range, 5V output, and ±0.5% accuracy. It features a 1/2 in NPT male conduit with free ends…
SKU 3G-OTH-176465
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The WIKA E-10 Pressure Transmitter (SKU 412PA4) is a stainless steel pressure transmitter with a 0 psi to 15,000 psi range, 5V output, and ±0.5% accuracy. It features a 1/2 in NPT male conduit with free ends, requires 30V DC power, and is rated IP67 and NEMA 4X. Overpressure is 21,750 psi with burst pressure at 2x range. No NIST-traceable calibration certificate is included.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the WIKA E-10 pressure transmitter used for?
The WIKA E-10 pressure transmitter is used for industrial pressure measurement in hydraulic systems, compressors, and process control. Its 0 psi to 15,000 psi range and IP67/NEMA 4X rating suit harsh environments. 3G Electric supplies this transmitter worldwide.
What are the specifications of the WIKA E-10 pressure transmitter?
The WIKA E-10 pressure transmitter (MPN 4216681) has a 0 psi to 15,000 psi range, 5V output, ±0.5% accuracy, and 30V DC power. It features a 1/2 in NPT male conduit with free ends, stainless steel housing, IP67/NEMA 4X rating, and burst pressure of 2x range.
Where to buy the WIKA E-10 pressure transmitter worldwide?
You can source the WIKA E-10 pressure transmitter from 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time.
How to install the WIKA E-10 pressure transmitter?
Install the WIKA E-10 pressure transmitter by connecting the 1/2 in NPT male conduit to a compatible process connection. Ensure the 30V DC power supply is off during wiring. Use the free ends for electrical connections and verify the IP67 seal is intact. 3G Electric provides sourcing support.
Digunakan dalam
Aplikasi umum untuk WIKAWIKA Produk
3G Electric memasok WIKA pressure transmitters with cable & wire leads. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.