Eclipse

When selecting an Eclipse ignition electrode, focus on three primary specifications: thread pitch, electrode gap, and probe length. Thread pitch must match the burner's mounting boss—common options include metric and fractional-inch patterns. Electrode gap determines the spark voltage required; typical ignition transformers output 4–10 kV, so the gap must be within the transformer's capability. Probe length positions the electrode tip in the combustion zone; too short may fail to ignite, too long may overheat. Material composition is also critical—high-temperature alloys resist oxidation and thermal fatigue. Always cross-reference the Eclipse reference number with your OEM documentation to ensure exact fit.

The Eclipse hydraulic crimp tool (MPN 902-480) delivers 12 tons of force, which is significantly higher than manual crimpers. This force is necessary for large-gauge cables (e.g., 4/0 AWG and above) where a secure, low-resistance connection is critical. Manual crimpers, like the Eclipse indent-style crimper (MPN 300-107), are suitable for smaller wires (up to 2 AWG) and lower-volume work. Hydraulic tools reduce operator fatigue and ensure consistent crimp depth, which is vital for high-current applications such as battery cables, panel wiring, and splicing. The 12-ton capacity also allows crimping of heavy-duty lugs and splices that manual tools cannot handle.

The Eclipse knockout punch and die kit (MPN 902-490) is designed to create clean, round holes in sheet metal, specifically for electrical enclosures, panel boxes, and industrial cabinets. It creates a 2-inch diameter hole in 10-gauge steel (approximately 3.5 mm thick). The manual hydraulic operation allows precise control without the need for a separate power source. This tool is ideal for installing conduit fittings, cable glands, or switches. It is not intended for stainless steel or thicker materials; for those, you would need a hydraulic punch driver set like MPN 902-598, which has a capacity range for mild steel up to a certain thickness.

No, the Eclipse static-control wrist strap (MPN 900-133) is not rated for explosive atmospheres. It is designed to protect sensitive electronic components from electrostatic discharge (ESD) during handling and assembly. The strap includes a coiled cord with a maximum length of 6 feet and one conductor for grounding. It is suitable for clean rooms, electronics manufacturing, and repair benches. For hazardous areas where flammable gases or dusts are present, you must use equipment specifically rated for explosive environments (e.g., ATEX or IECEx certified). Always check the area classification before using any static-control device.

The Eclipse pliers-style pin terminal crimper (MPN 300-015) is designed for D-Sub contacts and accommodates wire sizes from 26 AWG to 20 AWG. This range covers typical signal-level wiring used in D-Sub connectors, which are common in industrial control systems, data communication, and instrumentation. The crimper ensures a secure mechanical and electrical connection by deforming the terminal around the wire strands. For larger wire sizes (20–12 AWG), Eclipse offers another pliers-style crimper (MPN CP-463) that handles D-Sub contacts in that range. Always match the crimper to the wire gauge to avoid under-crimping or damaging the terminal.

The Eclipse magnetizer/demagnetizer (MPN 800-070) is a dual-purpose tool that magnetizes or demagnetizes ferrous tool tips and small parts. It has two openings: one for magnetization and one for demagnetization. To magnetize, pass the tool tip through the magnetizing opening; to demagnetize, pass it through the demagnetizing opening. This is useful for maintenance tasks where you need to pick up small ferrous parts (magnetized screwdrivers) or remove residual magnetism from tools to prevent them from attracting metal shavings. It is a plastic-bodied unit, making it safe for use near electrical components. Typical applications include precision assembly, watchmaking, and electronics repair.