Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
⌕
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
STANDARD XCHANGE logo

STANDARD XCHANGE

STANDARD XCHANGE is a manufacturer of heat exchangers and replacement components, with a product line centered on shell-and-tube (straight-tube) and plate-and-frame configurations. The brand supplies units designed for water heat dissipation across a range of thermal loads, from 525,000 BtuH to 3,800,000 BtuH, as seen in models such as the SX2000 series and SN503008 series. Shell materials include carbon steel, brass, and copper, with tube materials typically copper or brass, reflecting common industrial practice for water-to-water or steam-to-water heat transfer applications. The product range also includes replacement gaskets for plate-and-frame heat exchangers, such as the 810RG7 gasket made from Nitrile HT material, which is compatible with specific Grainger part numbers and manufacturer model P14-30-TL. These gaskets are intended for maintenance and retrofit of existing plate heat exchanger units. STANDARD XCHANGE heat exchangers are used in HVAC, process cooling, and industrial fluid handling systems where reliable thermal exchange is required. The brand does not emphasize proprietary certifications or patented technologies; instead, its products are specified by measurable parameters: BtuH dissipation, flow rate in gpm, shell and tube materials, and dimensional compatibility. 3G Electric stocks multiple SKUs from STANDARD XCHANGE, including both complete heat exchangers and service parts, enabling procurement specialists and maintenance managers to source replacements or new installations from a single distributor. The inventory covers a range of capacities and configurations, allowing engineers to match equipment to system requirements without relying on custom fabrication. 3G Electric provides logistics support for global shipment, ensuring that these components reach facilities worldwide. For technical buyers, the key considerations when selecting STANDARD XCHANGE products are the required heat load, allowable pressure drop, fluid compatibility, and connection sizes—details that are specified in the product datasheets and can be cross-referenced with existing system parameters. The brand’s straightforward product nomenclature and consistent specification format facilitate direct comparison and selection.

Genuine
OEM Parts
Expert
Tech Support
1 Hari
Respons Penawaran
Seluruh Dunia
Asal
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis & gambar
Respons Penawaran 1 Hari
Tim berbasis di Singapore
Stok siap tersedia & bea cukai ditangani6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.Pengiriman ke: Jakarta, Surabaya, Bandung, Medan, Batam
Jelajahi:
Tampilkan
Halaman 1 dari 2
← Sebelumnya12Berikutnya →

Tentang STANDARD XCHANGE

STANDARD XCHANGE is a manufacturer of heat exchangers and replacement components, with a product line centered on shell-and-tube (straight-tube) and plate-and-frame configurations. The brand supplies units designed for water heat dissipation across a range of thermal loads, from 525,000 BtuH to 3,800,000 BtuH, as seen in models such as the SX2000 series and SN503008 series. Shell materials include carbon steel, brass, and copper, with tube materials typically copper or brass, reflecting common industrial practice for water-to-water or steam-to-water heat transfer applications. The product range also includes replacement gaskets for plate-and-frame heat exchangers, such as the 810RG7 gasket made from Nitrile HT material, which is compatible with specific Grainger part numbers and manufacturer model P14-30-TL. These gaskets are intended for maintenance and retrofit of existing plate heat exchanger units. STANDARD XCHANGE heat exchangers are used in HVAC, process cooling, and industrial fluid handling systems where reliable thermal exchange is required. The brand does not emphasize proprietary certifications or patented technologies; instead, its products are specified by measurable parameters: BtuH dissipation, flow rate in gpm, shell and tube materials, and dimensional compatibility. 3G Electric stocks multiple SKUs from STANDARD XCHANGE, including both complete heat exchangers and service parts, enabling procurement specialists and maintenance managers to source replacements or new installations from a single distributor. The inventory covers a range of capacities and configurations, allowing engineers to match equipment to system requirements without relying on custom fabrication. 3G Electric provides logistics support for global shipment, ensuring that these components reach facilities worldwide. For technical buyers, the key considerations when selecting STANDARD XCHANGE products are the required heat load, allowable pressure drop, fluid compatibility, and connection sizes—details that are specified in the product datasheets and can be cross-referenced with existing system parameters. The brand’s straightforward product nomenclature and consistent specification format facilitate direct comparison and selection.

Aplikasi Umum

  • HVAC systems — STANDARD XCHANGE SX2000 series shell-and-tube heat exchangers for building cooling loops
  • Process cooling — STANDARD XCHANGE SN503008 series brass-shell units for industrial water cooling at 105 gpm
  • Maintenance and retrofit — STANDARD XCHANGE 810RG7 Nitrile HT gaskets for plate heat exchanger rebuilds
  • Hydronic heating — STANDARD XCHANGE copper-tube heat exchangers for boiler-to-water heat transfer
  • Oil cooling — STANDARD XCHANGE shell-and-tube units with carbon steel shells for lubricating oil systems

Pertanyaan yang Sering Diajukan

Pertanyaan umum tentang STANDARD XCHANGE dari 3G Electric.

What materials are used in STANDARD XCHANGE shell-and-tube heat exchangers?

STANDARD XCHANGE shell-and-tube heat exchangers are available with shells made from carbon steel, brass, or copper, and tubes typically made from copper or brass. For example, the SX2000 05014 model has a carbon steel shell, while the SN503008 series uses a brass shell. Tube material is specified per model; copper tubes are common in units like the SX2000 08048. Material selection affects corrosion resistance, thermal conductivity, and pressure rating, so verify compatibility with your process fluids.

Are STANDARD XCHANGE replacement gaskets compatible with other brands of plate heat exchangers?

STANDARD XCHANGE replacement gaskets, such as the 810RG7 made from Nitrile HT, are designed for use with specific STANDARD XCHANGE plate heat exchanger models, including 810RD4, 810RD5, 810RD6, and 810RD7. They are not marketed as universal replacements for other brands. Always confirm the gasket profile, material, and dimensions against your existing plate pack before ordering. The manufacturer part number P14-30-TL provides a reference for cross-checking compatibility.

What is the maximum heat dissipation capacity available in STANDARD XCHANGE straight-tube heat exchangers?

Based on the product range carried by 3G Electric, STANDARD XCHANGE straight-tube heat exchangers offer water heat dissipation capacities from 525,000 BtuH (model SX2000 05014) up to 3,800,000 BtuH (model SN503008072005). These units are rated at a flow rate of 105 gpm for the higher-capacity models. For specific applications, consult the datasheet to ensure the unit meets your thermal load requirements under your operating conditions.

Can STANDARD XCHANGE heat exchangers be used for steam heating applications?

STANDARD XCHANGE shell-and-tube heat exchangers are typically designed for water-to-water heat transfer, as indicated by the BtuH ratings based on water heat dissipation. While they may be used with steam on the shell side if the materials and pressure ratings are suitable, the brand does not explicitly market them for steam service. Verify the maximum operating temperature and pressure of the specific model, and consult the manufacturer's guidelines for steam applications to avoid material or performance issues.

How do I select the correct STANDARD XCHANGE replacement gasket for my plate heat exchanger?

To select the correct STANDARD XCHANGE replacement gasket, identify the model number of your existing plate heat exchanger. The 810RG7 gasket is compatible with models 810RD4, 810RD5, 810RD6, and 810RD7. Check the gasket material—Nitrile HT is suitable for water and some oil-based fluids up to moderate temperatures. If your unit uses a different model, refer to the manufacturer part number (e.g., P14-30-TL) to match the gasket profile. 3G Electric can assist with cross-referencing based on your unit's specifications.

Does 3G Electric supply STANDARD XCHANGE products?

Yes — 3G Electric (S) Pte. Ltd. supplies STANDARD XCHANGE products. We stock the STANDARD XCHANGE catalog and supply genuine factory-original products with full manufacturer warranty and technical support.