9500410 — Cross-Reference

Our equivalent: Labconco 3G-OTH-364113

10 produk yang kompatibel ditemukan untuk Labconco 3G-OTH-364113. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:9500410LABCONCO

Kecocokan referensi silang untuk “9500410”

“9500410” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

LABCONCO

LABCONCO 9500410 Epoxy Fume Hood Work Surface, 4 ft L x 1-1/4 in Thick, with Left Rear Cup Sink Cut-Out

SKU: 3G-OTH-364113

Available by RFQPenawaran + Layanan

Lebih banyak dari Labconco

9 lainnya Labconco produk dalam kisaran yang sama

Labconco

Labconco Epoxy fume hood work surface, 6 ft long by 1 1/4 in thick, with pre-drilled holes for venting and plumbing. Designed for use with Protector ClassMate laboratory hoods. No cup sink cut-out included.

SKU: 3G-OTH-364129

Lihat Detail Penawaran + Layanan

Labconco

Labconco This stainless steel work surface is designed for use with XPert Filtered Balance Stations. It provides a flat, corrosion-resistant platform for laboratory procedures. The surface measures 24 inches in overall length and 13/16 inches in thickness, with no cup sink cut-out.

SKU: 3G-OTH-364073

Lihat Detail Penawaran + Layanan

Labconco

Labconco Epoxy fume hood work surface measuring 4 ft long by 1-1/4 in thick, with a left rear cup sink cut-out. Corrosion resistant for use in laboratory fume hoods, providing a durable bench area that withstands chemical exposure.

SKU: 3G-OTH-364096

Lihat Detail Penawaran + Layanan

Labconco

Labconco This epoxy work surface is designed for use with XPert Filtered Balance Stations. It measures 6 ft in overall length, 1 in in thickness, and does not include a cup sink cut-out. The epoxy material provides a chemical-resistant platform for laboratory weighing and handling applications.

SKU: 3G-OTH-364134

Lihat Detail Penawaran + Layanan

Labconco

Labconco Epoxy fume hood work surface, 6 ft overall length, 1 1/4 in thick, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out on the right side. For use with Protector XL Laboratory Hoods.

SKU: 3G-OTH-364104

Lihat Detail Penawaran + Layanan

Labconco

Labconco This 1-inch-thick epoxy work surface is designed for use with Paramount Ductless Enclosures. It provides a chemical-resistant bench area for laboratory procedures, protecting the enclosure base from spills and corrosion. The surface measures 4 feet in length and does not include a cup sink cut-out.

SKU: 3G-OTH-364125

Lihat Detail Penawaran + Layanan

Labconco

Labconco Epoxy work surface for fume hoods, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out at the right rear. Overall length 6 ft, width 30 in, thickness 1-1/4 in. For use with Protector Premier Laboratory Hoods.

SKU: 3G-OTH-364082

Lihat Detail Penawaran + Layanan

Labconco

Labconco Epoxy fume hood work surface with pre-drilled holes for venting and plumbing. Includes a cup sink cut-out on the right side. Designed for use with Protector Premier Laboratory Hoods. Overall length 8 ft, thickness 1 1/4 in.

SKU: 3G-OTH-364087

Lihat Detail Penawaran + Layanan

Labconco

Labconco This epoxy fume hood work surface is 5 ft long and 1 1/4 in thick, featuring a cup sink cut-out at the right rear. It is corrosion resistant and designed for use with the Protector XStream Laboratory Hood. Typical applications include providing a durable, chemical-resistant work area in laboratory fume hoods.

SKU: 3G-OTH-364148

Lihat Detail Penawaran + Layanan