ANVIL Metal Pipe Elbow: 90° Elbow, 300 psi @ 150° F, 3/4 in x 1/2 in, Malleable Iron
The ANVIL Metal Pipe Elbow is a 90° elbow, medium-pressure threaded pipe fitting made of malleable iron. It has a maximum operating pressure of 300 psi @ 150° F and measures 3/4 in x 1/2 in. This fitting is…
SKU 3G-OTH-461987
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Elbow is a 90° elbow, medium-pressure threaded pipe fitting made of malleable iron. It has a maximum operating pressure of 300 psi @ 150° F and measures 3/4 in x 1/2 in. This fitting is manufactured in the USA (MPN 0310007802).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL 90° metal pipe elbow used for?
The ANVIL 90° metal pipe elbow is used to change the direction of piping in medium-pressure systems. It is suitable for steam, water, gas, and air lines in industrial plants, commercial buildings, and mechanical rooms where a durable, threaded malleable iron fitting is required.
What are the specifications of the ANVIL 3/4 in x 1/2 in pipe elbow?
This ANVIL pipe elbow is a 90° fitting with a maximum operating pressure of 300 psi at 150 °F. It has a 3/4 in female inlet and a 1/2 in female outlet, is made of malleable iron, and is manufactured in the USA (MPN 0310007802).
Where to buy ANVIL pipe fittings worldwide?
3G Electric supplies ANVIL pipe fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the ANVIL 90° malleable iron elbow (MPN 0310007802) for reliable medium-pressure piping.
How to install an ANVIL threaded pipe elbow?
Apply pipe thread sealant or PTFE tape to the male threads before assembly. Hand-tighten the ANVIL elbow, then use a wrench for an additional 1-2 turns. Do not overtighten, as malleable iron can crack. Ensure the fitting is aligned to avoid stress on the piping system.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
