Dayton Wire Rope U-Bolt Clip and Thimble Kit: 1/8 in Compatible Rope Dia
The DAYTON Wire Rope U-Bolt Clip and Thimble Kit (SKU 1DKK4) is a clip and thimble kit designed for use with 1/8-inch compatible rope diameter. It features a steel clip and a steel thimble, with a rope turnback…
SKU 3G-OTH-337400
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Wire Rope U-Bolt Clip and Thimble Kit (SKU 1DKK4) is a clip and thimble kit designed for use with 1/8-inch compatible rope diameter. It features a steel clip and a steel thimble, with a rope turnback length of 3 1/4 inches. This kit is manufactured by DAYTON under part number 1DKK4.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON Wire Rope U-Bolt Clip and Thimble Kit used for?
The DAYTON Wire Rope U-Bolt Clip and Thimble Kit is used to form secure, load-rated eyes on wire rope ends for lifting, rigging, and towing applications. It is suitable for industrial maintenance, construction, and marine environments where reliable rope termination is required.
What are the specifications of the DAYTON 1DKK4 clip and thimble kit?
The DAYTON 1DKK4 kit is compatible with 1/8 in rope diameter and has a rope turnback length of 3 1/4 in. Both the clip and thimble are made of steel. The manufacturer part number is 1DKK4. These specifications ensure proper fit and strength for light-duty wire rope assemblies.
Where to buy the DAYTON 1DKK4 wire rope clip and thimble kit worldwide?
3G Electric supplies the DAYTON 1DKK4 wire rope clip and thimble kit worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us for pricing and lead time on this steel clip and thimble kit.
How to install a DAYTON wire rope U-bolt clip and thimble kit?
To install the DAYTON kit, slide the thimble into the rope eye, place the U-bolt over the live end with the saddle on the dead end, and tighten nuts evenly to the recommended torque. Always follow standard wire rope termination practices and consult the manufacturer's guidelines for safe use.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton clip & thimble kits. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
