Dayton Wire Rope U-Bolt Clip and Thimble Kit: 1/4 in Compatible Rope Dia
The DAYTON Wire Rope U-Bolt Clip and Thimble Kit (SKU 1DKK6) is a clip and thimble kit designed for 1/4-inch compatible rope diameter. It features a steel clip and a steel thimble, with a rope turnback length of 4…
SKU 3G-OTH-337402
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Wire Rope U-Bolt Clip and Thimble Kit (SKU 1DKK6) is a clip and thimble kit designed for 1/4-inch compatible rope diameter. It features a steel clip and a steel thimble, with a rope turnback length of 4 3/4 inches. This kit is manufactured by DAYTON under part number 1DKK6.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON Wire Rope U-Bolt Clip and Thimble Kit used for?
The DAYTON Wire Rope U-Bolt Clip and Thimble Kit (1DKK6) is used to form secure, load-rated eyes on wire rope ends for lifting, rigging, and towing applications. It is suitable for industrial maintenance, construction, and marine environments where reliable rope terminations are required.
What are the specifications of the DAYTON Wire Rope U-Bolt Clip and Thimble Kit?
The DAYTON Wire Rope U-Bolt Clip and Thimble Kit (1DKK6) is designed for 1/4-inch compatible rope diameter with a rope turnback length of 4 3/4 inches. Both the clip and thimble are made of steel. The kit is manufactured by DAYTON under part number 1DKK6.
Where to buy the DAYTON Wire Rope U-Bolt Clip and Thimble Kit worldwide?
3G Electric supplies the DAYTON Wire Rope U-Bolt Clip and Thimble Kit (1DKK6) worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this DAYTON kit for your rigging needs.
How to install the DAYTON Wire Rope U-Bolt Clip and Thimble Kit?
To install the DAYTON Wire Rope U-Bolt Clip and Thimble Kit (1DKK6), place the thimble inside the rope eye, position the U-bolt over the live end with the saddle on the dead end, and tighten nuts evenly to the recommended torque. Always follow manufacturer guidelines for safe termination.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton clip & thimble kits. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
