Dayton Wire Rope U-Bolt Clip and Thimble Kit: 3/8 in Compatible Rope Dia
The DAYTON Wire Rope U-Bolt Clip and Thimble Kit (SKU 1DKK8) is a Clip & Thimble Kit designed for 3/8 in compatible rope diameter. It features a steel clip and a steel thimble, with a 6 1/2 in rope turnback length…
SKU 3G-OTH-337404
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Wire Rope U-Bolt Clip and Thimble Kit (SKU 1DKK8) is a Clip & Thimble Kit designed for 3/8 in compatible rope diameter. It features a steel clip and a steel thimble, with a 6 1/2 in rope turnback length. This kit is manufactured by DAYTON under part number 1DKK8.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON Wire Rope U-Bolt Clip and Thimble Kit used for?
The DAYTON Wire Rope U-Bolt Clip and Thimble Kit is used to form secure, load-rated eyes on wire rope ends for lifting, rigging, and towing applications. It is commonly used in construction, industrial maintenance, and marine environments to terminate rope without splicing.
What are the specifications of the DAYTON 1DKK8 Clip and Thimble Kit?
The DAYTON 1DKK8 kit is designed for 3/8 in compatible rope diameter with a 6 1/2 in rope turnback length. Both the clip and thimble are made of steel. The manufacturer part number is 1DKK8, and the brand is DAYTON.
Where to buy the DAYTON 1DKK8 Clip and Thimble Kit worldwide?
You can source the DAYTON 1DKK8 Clip and Thimble Kit through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time.
How to install the DAYTON Wire Rope U-Bolt Clip and Thimble Kit?
To install, place the thimble inside the rope eye, then position the U-bolt over the live end of the rope with the saddle on the dead end. Tighten nuts evenly to the recommended torque. Always follow standard wire rope termination practices and consult the manufacturer's guidelines for safe use.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton clip & thimble kits. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
