Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
⌕
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
Fireye Simplicity 65UV5 UV Flame Scanner. The 65UV5 scanner is available with a one-second or four-second flame failure response time (FFRT) depending on the model selected. The “E” versions are one-second FFRT, the non ”E” versions are four seconds FFRT. The Fireye 65UV5-1004QD and 1004EQD flame scanners provide an analog 4 to 20 mA output referenced to flame signal strength. - UV Flame Scanners
Gambar tidak tersedia
FireyeUV Flame Scanners

Fireye Simplicity 65UV5 UV Flame Scanner. The 65UV5 scanner is available with a one-second or four-second flame failure response time (FFRT) depending on the model selected. The “E” versions are one-second FFRT, the non ”E” versions are four seconds FFRT. The Fireye 65UV5-1004QD and 1004EQD flame scanners provide an analog 4 to 20 mA output referenced to flame signal strength.

The 65UV5 scanner is available with a one-second or four-second flame failure response time (FFRT) depending on the model selected. The “E” versions are one-second FFRT, the non ”E” versions are four seconds FFRT…

SKU 3G-OTH-02853

Merek
Fireye
Item
Simplicity 65UV5 UV Flame Scanner. The 65UV5 scanner is available with a one-second or four-second flame failure response time
Kategori
UV Flame Scanners
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyur
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Spesifikasi Teknis

Fireye
Models
65UV5, FFRT, 65UV5-1004QD, 1004EQD
Category
UV Flame Scanners
Approvals
CE, cULus, Ex, FM Approved
Lihat Lembar Spesifikasi Lengkap

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

Fireye Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

The 65UV5 scanner is available with a one-second or four-second flame failure response time (FFRT) depending on the model selected. The “E” versions are one-second FFRT, the non ”E” versions are four seconds FFRT. The Fireye 65UV5-1004QD and 1004EQD flame scanners provide an analog 4 to 20 mA output referenced to flame signal strength.

Digunakan dalam

Aplikasi umum untuk Fireye
Power-plant auxiliary boiler — M-Series II controller with UV flame scanner, programmed for gas/oil switchover and flame-presence monitoring.
Refinery process heater — MP100E programmer module managing multi-stage ignition and flame-out shutdown interlocks on high-pressure burners.
Petrochemical facility thermal oxidizer — MAUV1T UV amplifier module processing scanner signal from high-temperature burner housings with immune-response filtering.
Large-scale industrial oven (metal treating) — M-Series II with remote reset capability and dual-fuel solenoid isolation for operator safety and burner protection.
Cogeneration plant fuel-gas burner — Fireye scanner and modular controller stack integrated into BMS with remote monitoring of flame status and controller fault codes.

Fireye Produk

3G Electric memasok Fireye uv flame scanners. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari Fireye

Lihat semua Fireye suku cadang →
UV90 Series UV Flame Scanners. The UV90 Series Scanners are state-of-the-art ultraviolet flame scanners specifically designed for both front and lateral (90°) mounting, offering enhanced flexibility and performance in a variety of flame detection applications. These versatile UV scanners are engineered to provide a clearer and more accurate view of the flame in applications where line-of-sight positioning can impact performance.
Fireye
UV90 Series UV Flame Scanners. The UV90 Series Scanners are state-of-the-art ultraviolet flame scanners specifically designed for both front and lateral (90°) mounting, offering enhanced flexibility and performance in a variety of flame detection applications. These versatile UV scanners are engineered to provide a clearer and more accurate view of the flame in applications where line-of-sight positioning can impact performance.
UV90L Series UV Flame Scanners. The UV scanner is ideally suited for gaseous fuels (natural gas & propane). However, it can be used in detecting flames from standard fuel gases, some waste gases and light oil fuels such as No. 2 oil. Flames from heavier oils can be detected with UV scanners but the unburned fuel shroud and/or atomization shroud can block the passage of the UV from the flame zone to the UV tube, causing nuisance burner/boiler trips. Infrared detection is recommended for fuel oil heavier than No. 2, and some installations where waste gases are burned together with natural gas as the main flame.
Fireye
UV90L Series UV Flame Scanners. The UV scanner is ideally suited for gaseous fuels (natural gas & propane). However, it can be used in detecting flames from standard fuel gases, some waste gases and light oil fuels such as No. 2 oil. Flames from heavier oils can be detected with UV scanners but the unburned fuel shroud and/or atomization shroud can block the passage of the UV from the flame zone to the UV tube, causing nuisance burner/boiler trips. Infrared detection is recommended for fuel oil heavier than No. 2, and some installations where waste gases are burned together with natural gas as the main flame.
UV8A Series UV Flame Scanners. The UV8A Scanner is a 90° right-angle ultraviolet flame scanner designed for reliable flame detection. Compatible with M-Series, M-Series II, MicroM, FlameWorx, MB-2, D series controls, as well as Fireye® FLAME-MONITOR, BurnerLogix, and the Nexus System, the UV8A offers versatile integration for various burner management systems.
Fireye
UV8A Series UV Flame Scanners. The UV8A Scanner is a 90° right-angle ultraviolet flame scanner designed for reliable flame detection. Compatible with M-Series, M-Series II, MicroM, FlameWorx, MB-2, D series controls, as well as Fireye® FLAME-MONITOR, BurnerLogix, and the Nexus System, the UV8A offers versatile integration for various burner management systems.
InSight Series 4 95S4UV & 95IRS4 Flame Scanner. The Fireye InSight® Series 4 flame scanners, including models 95UVS4 and 95IRS4, are advanced, fully microprocessor-based devices featuring solid-state ultraviolet (UV) or infrared (IR) sensors. These integrated flame scanners eliminate the need for separate amplifiers or flame switch modules, offering streamlined installation and enhanced functionality.
Fireye
InSight Series 4 95S4UV & 95IRS4 Flame Scanner. The Fireye InSight® Series 4 flame scanners, including models 95UVS4 and 95IRS4, are advanced, fully microprocessor-based devices featuring solid-state ultraviolet (UV) or infrared (IR) sensors. These integrated flame scanners eliminate the need for separate amplifiers or flame switch modules, offering streamlined installation and enhanced functionality.
UV7SC Self-Check Flame Scanner. The UV7SC is a high-performance, self-check ultraviolet flame scanner, designed for continuous monitoring of gas or oil flames. It integrates with Fireye’s MBSERIES Multi-Burner and SBSERIES Single Burner controls, as well as the MBPF-100S and MB-600PF flame sensing modules.
Fireye
UV7SC Self-Check Flame Scanner. The UV7SC is a high-performance, self-check ultraviolet flame scanner, designed for continuous monitoring of gas or oil flames. It integrates with Fireye’s MBSERIES Multi-Burner and SBSERIES Single Burner controls, as well as the MBPF-100S and MB-600PF flame sensing modules.
UV5 Series UV Flame Scanners. The UV5-1 and UV5-2 are high-performance ultraviolet (UV) flame scanners designed for accurate and reliable flame monitoring in industrial and commercial burner systems. These UV scanners feature 6.5 ft. UL-rated cables, ensuring safe, efficient, and straightforward installation while meeting stringent safety and quality standards.
Fireye
UV5 Series UV Flame Scanners. The UV5-1 and UV5-2 are high-performance ultraviolet (UV) flame scanners designed for accurate and reliable flame monitoring in industrial and commercial burner systems. These UV scanners feature 6.5 ft. UL-rated cables, ensuring safe, efficient, and straightforward installation while meeting stringent safety and quality standards.
UV1AL Series UV Flame Scanners
Fireye
UV1AL Series UV Flame Scanners
UV7A4, UV7A4-1-CEX & UV7R4 Flame Scanners. The UV7A4, UV7A4-1-CEX and UV7R4 are high-sensitivity ultraviolet (UV) flame scanners designed for monitoring gas or oil flames that cycle frequently. These non-self-check scanners integrate seamlessly with Fireye’s MBSERIES Multi-Burner control, SBSERIES Single Burner control, and the MBPF-100S and MB-600PF flame sensing modules, providing reliable flame detection for various industrial applications.
Fireye
UV7A4, UV7A4-1-CEX & UV7R4 Flame Scanners. The UV7A4, UV7A4-1-CEX and UV7R4 are high-sensitivity ultraviolet (UV) flame scanners designed for monitoring gas or oil flames that cycle frequently. These non-self-check scanners integrate seamlessly with Fireye’s MBSERIES Multi-Burner control, SBSERIES Single Burner control, and the MBPF-100S and MB-600PF flame sensing modules, providing reliable flame detection for various industrial applications.