FireyeUV Flame Scanners

Fireye Series UV Flame Scanners

SKU 3G-OTH-02859

Brand

Fireye

Item

Series UV Flame Scanners

Local availability & support — Indonesia

Phone: +65 8878 8355

Technical Specifications

Fireye

Models

UV8A, MB-2 

Datasheet Content

[{"filename":"SC-102-Flame_Scanners_UV_Non_Self-Check_Models_UV1A3_UV1A6_UV8A_UV2_UV2A6_UV1A-1-CEX_45UV3_UV90-3_UV90-6_UV90-9_English_2018-05-30.pdf","text":"\n\n                                                                                                                SC-102\n                                                                                                           May 30, 2018\n\n                                                                                                                    ®\n\n               UV90\n                                                                               FIREYE\n                                                                       FLAME SCANNERS\n      UV1A       UV1A                                  UV non self-checking Scanner Models:\n                                              UV1A3, UV1A6, 3G-OTH-02859, UV2, UV2A6, UV1A-1-CEX,\n                                                            45UV3, UV90-3. UV90-6, UV90-9\n                        3G-OTH-02859\n                                                     For UV self-check Scanners refer to SC-101\n      3G-OTH-02859                                       For Infrared Photocell Scanners refer to SC-103\n\n\n                                                                                             APPROVED\n             45UV3\n                          45UV3\n\nDESCRIPTION\n                 The UV1A3/6, UV1A-1-CEX, UV2/UV2A6, 45UV3, UV90-3/6/9 Scanners are used with the\n                 M-Series, M-Series II, MicroM, FlameWorx, MB-2 and D-Series controls as well as the Fireye\n                 FLAME-MONITORTM, BurnerLogix and Nexus System. The UV1A3/6 scanners come with 3 ft. and\n                 6 ft. cables rated for Tray Cable - Exposed Run (TC-ER) and complies with the crush and impact\n                 requirements of the standard for metal clad cable, UL 1569. The UV1A-1-CEX is an ATEX rated\n                 version of the UV1A. The UV2 (36 inch) and UV2A6 (72 inch) are fitted with a 3/8” NPT female to\n                 1/2” NPT male adapter fitted into the 1/2” threaded coupling of the UV1A3/6 respectively. The\n                 UV90-3/6/9 is available with 3 ft., 6 ft. and 9 ft. shielded flexible cables.\n                 The 3G-OTH-02859 Scanner is a 90° right angle ultraviolet flame scanner used in conjunction with the\n                 M-Series, M-Series II, MicroM, FlameWorx, MB-2 and D series controls as well as the Fireye®\n                 FLAME-MONITORTM, BurnerLogix and the Nexus System. It is available only with 72 inch\n                 (1830mm) unshielded lead wires.\n                 The 45UV3 Scanner has a rugged cast housing that mounts on a 3/4 inch pipe with sleeve and set-\n                 screw. The replaceable UV tube is mounted in a vertical position for greater sensitivity. Non self-\n                 checking.\n                 The UV90 Series Scanners are designed for front and lateral (90°) mounting which, in some applica-\n                 tions allow the scanners to obtain a clearer view of the flame. The UV90, with its exclusive snug-fit\n                 mounting block, eliminates the need for a threaded sight pipe.\n                 The UV tube is made of quartz and is filled with a gas that ionizes when struck by UV radiation from\n                 the flame. In the absence of UV radiation, the gas acts as an insulator between two electrodes which\n                 are mounted inside the tube. These electrodes are energized continuously by a high voltage. During\n                 combustion, UV radiation ionizes the gas, causing current pulses to flow between the electrodes.\n                 These current pulses result in a flame signal which is transmitted to the amplifier in the control,\n                 where it is processed to energize or hold in the flame relay.\n\n                 WARNING: When installing or replacing UV scanners, a minimum pilot turndown test on\n                 pilot ignited burners and a spark pickup test on all burners must be performed. Refer to bul-\n                 letins E-1101, C-4000, MC-5000 or BurnerLogix for recommended procedures.\n                 - All installations, service and troubleshooting of Fireye products must be performed by qual-\n                 ified technicians!\n\n\n\n\n                                                                                                                     1\n\f                                                                                                 \n\n\n\n\nAPPLICATION\n                      UV scanners are recommended for detecting flames from standard fuel gases, some waste gases and\n                      light oil fuels such as No. 2 oil. Flames from heavier oils can be detected with UV scanners but the\n                      unburned fuel shroud and/or atomization shroud can block passage of the UV from the flame zone to\n                      the UV tube, causing nuisance burner/boiler trips. Infrared detection is recommended for fuel oil\n                      heavier than No. 2, and some installations where waste gases are burned together with natural gas as\n                      a main flame.\n                      NOTE: Certain safety codes and regulations require the use of self-checking ultraviolet scanners.\n                      For information on self-checking UV scanners, refer to Bulletin SC-101.\n\nSPECIFICATIONS\n                      Operating Voltage:             (S1-S2): 560 VAC @120V (230V) 50/60 Hz applied\n                      Operating Temperature Limits: Maximum: 200° F (94° C)\n                                             Minimum: -40° F (-40° C)\n                      Humidity:              85% RH maximum non-condensing\n                                                     1\n                      UV1A3: *                         /2\" NPT, 36\" (915mm) shielded leads\n                                                     1\n                      UV1A6: *                         /2\" NPT, 72\" (1830mm) shielded leads\n                                                     1\n                      3G-OTH-02859:                            /2\" NPT, 72\" (1830mm) unshielded leads,\n                      UV1A-1-CEX:                    1 NPT, 1/2\" NPT conduit cable entry\n                                                     3\n                      UV2: *                           /8\" NPT, 36\" (915mm) shielded leads\n                                                     3\n                      UV2A6: *                         /8\" NPT, 72\" (1830mm) shielded leads\n                      45UV2-1020                     1\" NPT mount 60 Hz, 72\" (1830mm) unshielded leads - OBSOLETE\n                                                     3\n                      45UV3-1050                       /4\" Sleeve/setscrew mount, 72\" (1830mm) unshielded leads\n                      UV90-3                    36\" (915mm) shielded leads\n                      UV90-6                    72\" (1830mm) shielded leads\n                      UV90-9                    108 \" (3660mm) shielded leads\n                      For scanner dimensions refer to Figures 2 and 4.\n                      Consult factory for custom lead lengths.\n                      * Comply with NEMA 4X\n\n\nIMPORTANT NOTE\n                      The information provided in this bulletin is directed to assist boiler and combustion service techni-\n                      cians who are experienced in the installation and operation of Fireye Flame Safety equipment. Per-\n                      sons not familiar with Fireye products should contact the nearest Fireye representative or other\n                      qualified service group.\n                      The UV1A, UV2, 3G-OTH-02859, UV1A-1-CEX, 45UV3 and UV90 as well as all other Fireye scanners, are\n                      designed to be used exclusively with the appropriate Fireye Flame safeguard and Burner Manage-\n                      ment controls. The application of these scanners to other than Fireye equipment should be reviewed\n                      for approval by Fireye.\n\n\nAPPLICATION REFERENCE\n                      UV1A, UV2, 3G-OTH-02859, 45UV3 and UV90 can be used only with the following FIREYE flame safe-\n                      guard controls.\n         FIREYE        MB-2 SERIES      MicroM &           D SERIES         PFM        FLAMEWORX     NEXUS    BURNERLOGIX\n     FLAME-MONITOR                     M-SERIES II                      ADAPTOR KITS\n    To be used with   Use with         MAUV1             All D-Series     PFM2UV       MBUV-300D     NX3000    YB110UV\n    EUV1 Amplifier    61-3359          MAUV1T            using            PFM3UV       MBUV-310D     NX3100    YB230UV\n    Card              UV Amplifier     MEUV1             72DUV1                                      NX4000\n                                       MEUV4             Amplifier                                   NX4100\n\n\n\n2\n\f                                                                                                                    \n\n\n\n\n                            CAUTION: The UV1A, UV2, 3G-OTH-02859, 45UV3 and UV90 ultra-violet flame scanners and asso-\n                            ciated amplifier modules are non-self checking UV systems and should be applied only to\n                            burners that cycle often (e.g.: a minimum of once per 12 hours) in order for the safety check-\n                            ing circuit to be exercised. If component checking is required during burner operation for\n                            constantly fired burners, utilize the self-checking ultra-violet flame scanners (45UV5) with\n                            associated amplifier module (EUVS4), (MEUVS, (MBUVS) or YB110UVSC or the infrared\n                            flame scanner (48PT2) with associated Auto Check amplifier (E1R1, E1R2, E1R3, MEIR1,\n                            MEIR4, YB110IR).\n\nFIGURE 1.                   TYPICAL SCANNER MOUNTING\n\n\n            BURNER FRONT PLATE\n         1/2'' SWIVEL MOUNT                                           1/2'' SWIVEL MOUNT            AIR ENTRY (PURGE\n                                       UV1A                                    #60-302                AND COOLING)\n                 #60-302\n                                                                                                     1/2'' NIPPLE         UV1A\n                 1/2'' NIPPLE                                                1/2'' NIPPLE\n\n  2\"                                                             2\"\n\n                     STANDARD MOUNTING                                              STANDARD MOUNTING WITH\n                                                                                      PURGING/COOLING AIR\n\n\n\n\n                                                                                                              UNION COUPLING\n       1/2'' SIGHT PIPE                                               1/2'' SWIVEL MOUNT                      #60-1257 WITH QUARTZ WINDOW\n                                                                              #60-302                         #60-1290 WITH QUARTZ LENS\n                                                                                   1/2'' NIPPLE         1/2'' NIPPLE          UV1A\n\n                                                                 2\"\n             ALTERNATE STANDARD MOUNTING\n                  (NOT ADJUSTABLE)\n                                                                                    MOUNTING FOR EXCESSIVE FURNACE\n                                                                                        OR WINDBOX PRESSURE\n\n\n       1/2'' SWIVEL MOUNT         HEAT INSULATOR\n                 #60-302              #35-69\n                 1/2'' NIPPLE                               UV1A\n\n  2\"\n\n…

Technical Documents

No technical documents available for this product.

Request documentation →

Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.

Talk to an engineer

Ask a question

Fireye Products

3G Electric (S) Pte. Ltd. — Singapore

Product Description

Fireye 3G-OTH-02859 Series UV Flame Scanners adalah scanner nyala api ultraviolet sudut 90° yang dirancang untuk mendeteksi radiasi UV dari nyala api pada sistem pembakaran industri. Scanner ini digunakan bersama kontrol M-Series, M-Series II, MicroM, FlameWorx, MB-2, D-Series, serta sistem Fireye FLAME-MONITOR, BurnerLogix, dan Nexus. Model 3G-OTH-02859 dilengkapi kabel timah tanpa pelindung sepanjang 72 inci (1830 mm) dan memiliki persetujuan cULus serta FM Approved.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Frequently Asked Questions

Apa fungsi Fireye UV8A UV Flame Scanner?

Fireye UV8A UV Flame Scanner berfungsi mendeteksi radiasi ultraviolet dari nyala api pada pembakar industri. Scanner sudut 90° ini digunakan bersama kontrol seperti M-Series, MB-2, dan D-Series untuk memastikan nyala api terdeteksi dengan andal, sehingga sistem pembakaran dapat beroperasi aman.

Apa spesifikasi Fireye UV8A Series?

Fireye UV8A Series adalah UV flame scanner sudut 90° dengan kabel timah tanpa pelindung sepanjang 72 inci (1830 mm). Scanner ini memiliki persetujuan cULus dan FM Approved. Model yang tersedia adalah UV8A dan digunakan dengan kontrol MB-2 serta sistem Fireye lainnya.

Di mana beli Fireye UV8A UV Flame Scanner di Indonesia?

Anda dapat membeli Fireye UV8A UV Flame Scanner melalui 3G Electric, distributor resmi yang memasok peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk pengiriman produk ini langsung ke lokasi Anda. Hubungi kami untuk minta penawaran.

Apakah Fireye UV8A cocok untuk sistem pembakaran industri?

Ya, Fireye UV8A dirancang untuk sistem pembakaran industri dan kompatibel dengan kontrol M-Series, M-Series II, MicroM, FlameWorx, MB-2, D-Series, serta sistem Fireye FLAME-MONITOR, BurnerLogix, dan Nexus. Scanner ini memberikan deteksi nyala api UV yang andal pada aplikasi ketel uap dan pembakar.

Used in

Common applications for Fireye

Power-plant auxiliary boiler — M-Series II controller with UV flame scanner, programmed for gas/oil switchover and flame-presence monitoring.

Refinery process heater — MP100E programmer module managing multi-stage ignition and flame-out shutdown interlocks on high-pressure burners.

Petrochemical facility thermal oxidizer — MAUV1T UV amplifier module processing scanner signal from high-temperature burner housings with immune-response filtering.

Large-scale industrial oven (metal treating) — M-Series II with remote reset capability and dual-fuel solenoid isolation for operator safety and burner protection.

Cogeneration plant fuel-gas burner — Fireye scanner and modular controller stack integrated into BMS with remote monitoring of flame status and controller fault codes.

Fireye Products

3G Electric supplies Fireye uv flame scanners. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

Browse all Fireye products →Contact our engineers →