Fireye InSight II Flame Scanner Cooling Cover

[{"filename":"133-749_Cooling_Cover_60-2930-1_for_InSight_II_English_2013-05-06.pdf","text":"\n\n 133-749\n MAY 6, 2013\n\n\n\n Cooling Cover\n P/N 60-2930-1 for InSight II\n P/N 60-2930-2 for InSight II CEX\nDescription\n In high ambient temperature applications, cooling air applied to the 3/8” tapping on the InSight II\n scanner’s mounting flange may be unable to maintain the scanner’s temperature below its published\n limit. An effective solution may be to install the scanner in a Cooling Cover and air purge the space\n between the cover and the scanner. Either compressed air or the chilled air output of a Vortex Tube\n Kit (Fireye p/n 60-2720) may be attached to the Cooling Cover’s 3/8” NPT female Air Entry Port\n and will exit through the Cooling Cover’s 1/2” NPT Air Exit Port. A porous bronze exhaust muffler\n fitting is provided for installation into the 1/2” exit port (not shown).\n\n\n L1\n L2\n Air Exit Port\n 1/2” NPT FM thread\n\n\n\n 60-2930-1 Shown 6.63 Dia.\n (168)\n\n\n\n\n 60-2919-X\n Mounting Flange\n (ordered separately) Draw-latch\n closures (3)\n Locking Ring Air Entry Port\n p/n 33-520 3/8” NPT FM thread\n (supplied with the 60-2930)\n Note: Do not use the standard locking\n ring supplied with the 95DSS3 or\n with the 61-7209-x Fiber Optic\n Inner Carrier Assembly.\n\n 59-546-xx cable &\n 59-547-xx cable\n P/N For use with L1 L2 (ordered separately for 95DSS3-1)\n 60-2930-1 95DSS3-1 12.6 (320) 9.2 (234)\n 60-2930-2 95DSS3-1CEX 13.5 (343) 10.1 (257) MATERIAL: Gray CPVC\n DIMENSIONS: Inch/MM\n\n\n\n FIREYE ® 133-749\n 3 Manchester Road MAY 6, 2013\n Derry, New Hampshire 03038 USA supersedes June 2, 2011\n www.fireye.com\n\n\n\n 1"}]