Fireye InSight II Wireless Handheld Commissioning Tool

[{"filename":"133-735-95WIHH-2_Wireless_Handheld_Commissioning_Tool_English_2013-05-06.pdf","text":"\n\n 133-735\n MAY 6, 2013\n\n\n\n\n II\n WIRELESS\n HANDHELD\n COMMISSIONING TOOL\n P/N 95WIHH-2\n II 1 G Ex ia IIC T4 CLASS I, DIV 1 GROUPS A, B, C, D T4A\n Ta= -20° to 40°C AEx ia IIC T4 Ta= -20°C to 40°C\n 1725 FM09ATEX0066\n\n\n\n\nDESCRIPTION\n The 95WIHH-2 Wireless Handheld Commissioning Tool is an intrinsically safe, wireless IrDA\n ready (Infrared Data Association) device designed to be used with InSight II scanners. The device\n can be used to remotely navigate the InSight II scanner’s menu, set and review operating parameters,\n and view error messages and alerts.\n The device offers an IrDA automatic address discovery feature that enables an end user to quickly\n establish a communication link with the target scanner without having prior knowledge of the scan-\n ner’s address. The address discovery feature is particularly useful in applications where multiple\n scanners are deployed.\n\n\n\n\n 1\n\f \n\n\n\n\n OPERATION\n Before the tool can be used, it is important that the four alkaline “AAA” batteries (provided) are\n inserted into the unit. See Figure 3 for pictorial details. For proper operation, the batteries must be\n oriented properly in the battery holder. The battery holder should be mounted “face-down” in the\n battery compartment before securing with the compartment cover.\n Initial configuration may be necessary before the handheld commissioning tool can be fully opera-\n tional. Please see the CONFIG MENU section below for configuration information. The most\n important configuration step is the communication address. The handheld commissioning tool can\n only communicate with the InSight II scanner when the IrDA communication addresses match. By\n default, the handheld communication tool is programmed to communicate on IrDA address 247.\n Please consult the bulletin for the InSight II scanner on how to manually review or change the IrDA\n communication address.\n Alternatively, the IrDA communication address can be Auto Detected by the handheld commission-\n ing tool by following the Auto Detect procedure outlined in the CONFIG MENU. Auto Detect pro-\n vides a convenient way of retrieving the communication address of the target scanner. Upon\n retrieving, the handheld commissioning tool automatically updates its internal IrDA address register\n and will then be ready to communicate with the target scanner.\n NOTE: Since the Auto Detect process implements an address discovery protocol, it is important that\n the handheld commissioning tool is properly aimed and within close proximity of the target scanner.\n Systems with multiple scanners within close proximity may present communication interference\n while performing address discovery.\n There are two battery saving options in the CONFIG MENU: Auto Time Off and Backlight LED\n Intensity. Adjusting these options will impact battery life. A conservative setting of shutting the\n backlight off and setting the Sleep Timer to 1 minute will shield the best battery life performance. A\n liberal setting of 100% Backlight Intensity and disabling the sleep timer will yield the worst battery\n life performance. By default, the scanner is set for 4 minutes Auto Off Time (sleep) and 100% back-\n light intensity. Users are advised to pick a setting that is best suited for their application.\n After a communication link is successfully established with the target scanner, the handheld com-\n mission tool can be used to navigate the scanner’s menu, view and change operating parameters, and\n view error messages and alerts. The scanner’s menu system is described in the InSight II bulletin\n CU-113.\n When the handheld commissioning tool is not in use, it is recommended that the power switch is\n placed in the OFF position. Although the handheld commissioning tool goes into sleep mode after it\n has reached the set idle period, longest battery life is achieved when the unit is completely powered\n off by sliding the side power switch to the OFF position. While in sleep mode, the handheld commis-\n sioning tool can be brought to normal operating mode by pressing the “Fireye” key or sliding the\n side power switch to OFF ↔ ON.\n\n\n APPLICATION\n The 95WIHH-2 Wireless Handheld Commissioning Tool is designed to be used with InSight II scan-\n ners fitted with 95WIDISP-2 transmitter modules. Communication link distance is up to 5 feet, with\n a view angle of 30 degrees (See figure 4).\n Several factors that present IrDA communication issues should be avoided. Factors like operation in\n direct sunlight, exceeding maximum link distance or angle, or operation with multiple scanners\n (within close proximity) with identical IrDA addresses are not conducive to successful IrDA com-\n munication.\n\n\n\n\n2\n\f \n\n\n\n\nDIMENSIONS\n\nFIGURE 1. TYPE 95WIHH-2 WIRELESS HANDHELD COMMISSIONING TOOL\n\n\n\n 36.7\n 1.44\n 80.8\n 3.18\n 27.9\n 1.10\n\n\n\n\n 125\n 4.92\n\n\n\n\n Dimensions: inch [mm]\n\n\n\n\nSPECIFICATIONS\n MECHANICAL:\n Housing Material: ABS Plastic\n Color: Gray\n Environment: IP 40\n Operating Temperature: -4°F to 104°F (-20°C to 40°C)\n Storage Temperature: -4°F to 140°F (-20°C to 60°C)\n Humidity: 0% to 85% relative humidity, non condensing\n Shipping Weight: 0.30lb (0.136Kg)\n\n ELECTRICAL:\n Power Source: 1.5V “AAA” alkaline battery (4x) (provided)\n Status Indication: 2 line x 16 character alpha-numeric LCD display\n Operator Interface: Five (5) button membrane keypad and one (1) side slide switch\n Power Consumption: Active w/backlight on: 213 mW\n Active w/backlight off: 51 mW\n Sleep: 2.8 mW\n\n\n\n\n 3\n\f \n\n\n\n\nTHE CONFIG MENU\nFIGURE 2. CONFIG MENU LOOP\n\n\n\n Press\n Config Menu\n simultaneously\n\n + Keypad Legend\n Main DISPLAY MENU\n Screen SELECT TO ENTER > UP Key\n (Scrolls through menu,\n counter clockwise)\n DOWN Key\n SELECT\n (Scrolls through menu, clockwise)\n\n\n PROGRAM Key\n Firmware Rev.\n xxxx\n SELECT Key\n\n\n\n Code CRC\n xxxx\n\n\n\n Save new value\n IrDA COMS ADDR IrDA COMS ADDR\n SELECT\n xxx 247 Change value\n\n\n\n\n Save new value\n Auto Off Time (m) Auto Off Time (m)\n SELECT\n xx 10 Change value\n\n\n\n\n Save new value\n Backlight LEDs % Backlight LEDs %\n SELECT\n xxx 100 Change value\n\n\n\n\n Save new value\n Detect IrDA Addr Detect IrDA Addr\n SELECT\n xxx YES Change value\n Must aim commissioning tool\n…