GRUVLOK Clamp Coupling: Bolted Clamp Tee, 3 in x 3 in x 2 in, Ductile Iron, NBR Seal
The GRUVLOK Bolted Clamp Tee is a 3 in x 3 in x 2 in outlet pipe clamp coupling made of ductile iron with an NBR seal, rated for a maximum operating pressure of 500 psi (MPN 0390172120). 3G Electric sources this…
SKU 3G-OTH-466144
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Bolted Clamp Tee is a 3 in x 3 in x 2 in outlet pipe clamp coupling made of ductile iron with an NBR seal, rated for a maximum operating pressure of 500 psi (MPN 0390172120). 3G Electric sources this genuine GRUVLOK fitting as part of our broader industrial supply capability across 14 departments, with specialist expertise in combustion, pumps and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a GRUVLOK bolted clamp tee used for?
A GRUVLOK bolted clamp tee creates a branch connection in grooved-end piping systems, commonly used in fire protection, HVAC, and industrial process lines. This 3 in x 3 in x 2 in ductile iron fitting with NBR seal handles up to 500 psi.
What are the specifications of the GRUVLOK 0390172120 clamp tee?
The GRUVLOK 0390172120 is a bolted clamp tee with fitting pipe size 3 in x 3 in x 2 in, made of ductile iron with an NBR seal, and rated for a maximum operating pressure of 500 psi. It is a genuine GRUVLOK outlet pipe clamp coupling.
Where to buy a GRUVLOK 3 in x 3 in x 2 in clamp tee worldwide?
3G Electric supplies the genuine GRUVLOK 0390172120 bolted clamp tee to customers worldwide. We handle full logistics, customs clearance, and delivery for this ductile iron fitting rated at 500 psi, ensuring you receive the correct part for your piping system.
How to install a GRUVLOK bolted clamp tee?
Installation requires clean, properly grooved pipe ends. Lubricate the NBR gasket, place it over the pipe ends, and position the ductile iron clamp tee halves. Tighten bolts evenly to the torque specified by GRUVLOK. Always follow the manufacturer's instructions for pressure ratings and bolt torque.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.








