GRUVLOK Clamp Coupling: Bolted Clamp Tee, 8 in x 8 in x 2 in, Ductile Iron, NBR Seal
The GRUVLOK Clamp Coupling is a bolted clamp tee outlet pipe fitting in ductile iron with an NBR seal, sized 8 in x 8 in x 2 in and rated for a maximum operating pressure of 500 psi (MPN 0390172708). 3G Electric…
SKU 3G-OTH-466162
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Clamp Coupling is a bolted clamp tee outlet pipe fitting in ductile iron with an NBR seal, sized 8 in x 8 in x 2 in and rated for a maximum operating pressure of 500 psi (MPN 0390172708). 3G Electric sources this genuine GRUVLOK component across 14 industrial departments — with specialist depth in combustion, pumps and controls — and supports your project from specification through delivery.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a GRUVLOK bolted clamp tee used for?
A GRUVLOK bolted clamp tee connects branch lines to a main pipe run in grooved-end piping systems. It is used in fire protection, HVAC, and industrial water supply applications where a reliable, high-pressure branch connection is needed.
What are the specifications of the GRUVLOK 0390172708 clamp coupling?
This GRUVLOK clamp coupling is a bolted clamp tee with fitting pipe size 8 in x 8 in x 2 in. It is made of ductile iron with an NBR seal and rated for a maximum operating pressure of 500 psi. The manufacturer part number is 0390172708.
Where to buy GRUVLOK clamp couplings worldwide?
3G Electric supplies genuine GRUVLOK clamp couplings worldwide. We handle full logistics, customs clearance, and delivery to your project site. Contact us for a quote on the 0390172708 or any GRUVLOK fitting across our 14 industrial departments.
How to install a GRUVLOK bolted clamp tee?
Installation requires grooved pipe ends, proper gasket lubrication, and torquing the bolts evenly to the manufacturer's specification. Always verify pipe alignment and seal seating before pressurizing. Refer to GRUVLOK's installation instructions for torque values and bolt patterns.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.








