GRUVLOK Clamp Coupling: Bolted Clamp Tee, 4 in x 4 in x 1/2 in, Ductile Iron, NBR Seal
The GRUVLOK Bolted Clamp Tee is a 4 in x 4 in x 1/2 in outlet pipe clamp coupling made of ductile iron with an NBR seal, rated for a maximum operating pressure of 500 psi (MPN 0390172187). 3G Electric interprets this…
SKU 3G-OTH-466150
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Bolted Clamp Tee is a 4 in x 4 in x 1/2 in outlet pipe clamp coupling made of ductile iron with an NBR seal, rated for a maximum operating pressure of 500 psi (MPN 0390172187). 3G Electric interprets this demand and sources the genuine GRUVLOK fitting across 14 industrial departments — with specialist depth in combustion, pumps and controls — ensuring you get the right answer, not just a catalog.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a GRUVLOK bolted clamp tee used for?
A GRUVLOK bolted clamp tee connects branch piping to a main run in grooved-end fire protection, HVAC, or industrial water systems. The 4 in x 4 in x 1/2 in outlet allows a small-diameter takeoff from a larger line, using a ductile-iron body and NBR seal rated to 500 psi.
What are the specifications of the GRUVLOK 0390172187 clamp tee?
The GRUVLOK 0390172187 is a bolted clamp tee with fitting pipe size 4 in x 4 in x 1/2 in. It is made of ductile iron with an NBR seal and has a maximum operating pressure of 500 psi. This outlet pipe clamp coupling is designed for grooved-end piping systems.
Where to buy a GRUVLOK 4 in x 4 in x 1/2 in clamp tee worldwide?
3G Electric supplies the genuine GRUVLOK 0390172187 bolted clamp tee to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source this fitting across 14 departments, with specialist depth in combustion, pumps, and controls.
How to install a GRUVLOK bolted clamp tee?
Install the GRUVLOK bolted clamp tee by aligning the grooved pipe ends with the fitting, then tightening the bolts evenly to the manufacturer’s torque specification. Ensure the NBR seal is properly seated and lubricated per GRUVLOK guidelines. Always verify pressure rating and pipe compatibility before installation.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.








