GRUVLOK Clamp Coupling: Bolted Clamp Tee, 2 in x 2 in x 1 1/4 in, Ductile Iron
The GRUVLOK Bolted Clamp Tee is a ductile-iron outlet pipe clamp with an NBR seal, rated for 500 psi maximum operating pressure. It accommodates a 2 in x 2 in x 1-1/4 in fitting pipe size (MPN 0390171932). 3G…
SKU 3G-OTH-466170
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Bolted Clamp Tee is a ductile-iron outlet pipe clamp with an NBR seal, rated for 500 psi maximum operating pressure. It accommodates a 2 in x 2 in x 1-1/4 in fitting pipe size (MPN 0390171932). 3G Electric sources this genuine industrial coupling across 14 departments, with specialist expertise in pumps and controls to support your piping-system requirements.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the GRUVLOK Bolted Clamp Tee used for?
The GRUVLOK Bolted Clamp Tee is used to create a branch connection in grooved-end piping systems, typically in fire protection, HVAC, or industrial process lines. It joins a 2-inch main line to a 1-1/4-inch outlet, handling pressures up to 500 psi with a ductile-iron body and NBR seal.
What are the specifications of the GRUVLOK 0390171932 clamp coupling?
This GRUVLOK clamp coupling is a bolted clamp tee with a 2 in x 2 in x 1-1/4 in fitting pipe size. It is made of ductile iron with an NBR seal and rated for a maximum operating pressure of 500 psi. The manufacturer part number is 0390171932.
Where to buy GRUVLOK clamp couplings worldwide?
3G Electric supplies genuine GRUVLOK clamp couplings worldwide, handling full logistics and customs clearance for international orders. As a global industrial solutions provider, we source this bolted clamp tee and deliver it to your site, supporting piping systems across 14 departments including pumps and controls.
How to install a GRUVLOK bolted clamp tee?
To install a GRUVLOK bolted clamp tee, ensure pipe ends are clean and grooved per manufacturer specifications. Place the gasket over the pipe ends, position the clamp tee over the gasket, and tighten the bolts evenly to the recommended torque. Always follow GRUVLOK's installation instructions for pressure ratings up to 500 psi.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.








