IFM Patch cable: M12 Male Straight x DIN Form B Industrial, 1 m Cable Lg, PUR
The IFM Patch cable is a DIN Form Industrial B Solenoid Connector x M12 Cordsets, featuring an M12 Male Straight connector and DIN Form B Industrial interface. This cordset has a 1 m cable length with a black PUR…
SKU 3G-OTH-48338
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The IFM Patch cable is a DIN Form Industrial B Solenoid Connector x M12 Cordsets, featuring an M12 Male Straight connector and DIN Form B Industrial interface. This cordset has a 1 m cable length with a black PUR jacket, 5 pins, and a wire size of 5.00 mm. It is rated IP67 for environmental protection, with the manufacturer part number E11433.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the IFM E11433 patch cable used for?
The IFM E11433 patch cable connects a DIN Form B Industrial solenoid connector to an M12 male straight interface. It is used in industrial automation, sensor-actuator wiring, and control systems requiring a 5-pin, IP67-rated, 1 m PUR cable for reliable signal and power transmission.
What are the specifications of the IFM E11433 patch cable?
The IFM E11433 patch cable has 5 pins, a 1 m cable length, 5.00 mm wire size, black PUR jacket, and IP67 rating. It features an M12 male straight connector on one end and a DIN Form B Industrial interface on the other, with manufacturer part number E11433.
Where to buy the IFM E11433 patch cable worldwide?
3G Electric supplies the IFM E11433 patch cable worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order this DIN Form B to M12 cordset for your automation needs.
How to install the IFM E11433 patch cable?
To install the IFM E11433 patch cable, connect the M12 male straight plug to the compatible sensor or device port, and the DIN Form B connector to the solenoid valve. Ensure the locking collar is tightened by hand. Verify the IP67 seal is intact before use in wet or dusty environments.
Digunakan dalam
Aplikasi umum untuk IFMIFM Produk
3G Electric memasok IFM din form industrial b solenoid connector x m12 cordsets. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.













